Filter :
| Standard and/or project under the direct responsibility of ISO/TC 38/SC 24 Secretariat | Stage | ICS |
|---|---|---|
|
Textiles — Standard atmospheres for conditioning and testing
|
90.20 | |
|
Textiles — Standard atmospheres for conditioning and testing — Amendment 1
|
60.60 | |
|
Textiles — Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery — Part 1: Method of the horizontally folded specimen
|
60.60 | |
|
Textiles — Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery — Part 2: Method of the vertically folded specimen
|
60.60 | |
|
Textiles — Determination of the recovery from creasing of a horizontally folded specimen of fabric by measuring the angle of recovery
|
95.99 | |
|
Textiles — Woven fabrics — Determination of mass per unit length and mass per unit area
|
90.93 | |
|
Textiles — Woven fabrics — Measurement of width of pieces
|
95.99 | |
|
Textiles — Woven fabrics — Measurement of length of pieces
|
95.99 | |
|
Textiles — Determination of thickness of textiles and textile products
|
90.20 | |
|
Textiles — Determination of mass — Vocabulary
|
90.93 | |
|
Textiles — Woven fabrics — Construction — Methods of analysis — Part 1: Methods for the presentation of a weave diagram and plans for drafting, denting and lifting
|
90.93 | |
|
Textiles — Woven fabrics — Construction — Methods of analysis — Part 2: Determination of number of threads per unit length
|
95.99 | |
|
Textiles — Methods for analysis of woven fabrics construction — Part 2: Determination of number of threads per unit length
|
60.60 | |
|
Textiles — Woven fabrics — Construction — Methods of analysis — Part 3: Determination of crimp of yarn in fabric
|
90.93 | |
|
Textiles — Woven fabrics — Construction — Methods of analysis — Part 4: Determination of twist in yarn removed from fabric
|
90.93 | |
|
Textiles — Woven fabrics - Construction - Methods of analysis — Part 5: Determination of linear density of yarn removed from fabric
|
95.99 | |
|
Textiles — Methods for analysis of woven fabrics construction — Part 5: Determination of linear density of yarn removed from fabric
|
60.60 | |
|
Textiles — Woven fabrics — Construction — Methods of analysis — Part 6: Determination of the mass of warp and weft per unit area of fabric
|
95.99 | |
|
Textiles — Methods for analysis of woven fabrics construction — Part 6: Determination of the mass of warp and weft per unit area of fabric
|
60.60 | |
|
Textiles — Determination of the permeability of fabrics to air
|
90.93 | |
|
Textiles --Determination of the anti-contamination propensity of fabrics to particulate matter — Digital measurement method
|
30.60 |
|
|
Textiles — Determination of fabric propensity to surface fuzzing and to pilling — Part 1: Pilling box method
|
95.99 | |
|
Textiles — Determination of fabric propensity to surface pilling, fuzzing or matting — Part 1: Pilling box method
|
60.60 | |
|
Textiles — Determination of fabric propensity to surface fuzzing and to pilling — Part 2: Modified Martindale method
|
95.99 | |
|
Textiles — Determination of fabric propensity to surface pilling, fuzzing or matting — Part 2: Modified Martindale method
|
60.60 | |
|
Textiles- Determination of the fabric propensity to surface pilling, fuzzing or matting — Part 3: Random tumble pilling method
|
95.99 | |
|
Textiles — Determination of fabric propensity to surface pilling, fuzzing or matting — Part 3: Random tumble pilling method
|
60.60 | |
|
Textiles — Determination of fabric propensity to surface pilling, fuzzing or matting — Part 4: Assessment of pilling, fuzzing and matting by visual analysis
|
60.60 | |
|
Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 1: Martindale abrasion testing apparatus
|
90.93 | |
|
Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 1: Martindale abrasion testing apparatus — Technical Corrigendum 1
|
60.60 | |
|
Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown
|
95.99 | |
|
Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown — Technical Corrigendum 1
|
95.99 | |
|
Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown
|
90.93 | |
|
Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 3: Determination of mass loss
|
90.93 | |
|
Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 3: Determination of mass loss — Technical Corrigendum 1
|
60.60 | |
|
Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 4: Assessment of appearance change
|
90.93 | |
|
Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 4: Assessment of appearance change — Technical Corrigendum 1
|
60.60 | |
|
Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 5: Wet abrasion testing
|
30.00 |
|
|
Woven fabrics — Distortion — Determination of skew and bow
|
90.60 | |
|
Textile — Biaxial tensile properties of woven fabric — Determination of elasticity properties using a cruciform test piece
|
60.60 | |
|
Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method
|
95.99 | |
|
Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method
|
90.93 | |
|
Textiles — Tensile properties of fabrics — Part 2: Determination of maximum force using the grab method
|
95.99 | |
|
Textiles — Tensile properties of fabrics — Part 2: Determination of maximum force using the grab method
|
90.93 | |
|
Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 1: Determination of maximum force to seam rupture using the strip method
|
95.99 | |
|
Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 1: Determination of maximum force to seam rupture using the strip method
|
90.20 | |
|
Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method
|
95.99 | |
|
Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method
|
90.92 | |
|
Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method
|
40.00 | |
|
Textiles — Determination of the slippage resistance of yarns at a seam in woven fabrics — Part 1: Fixed seam opening method
|
90.93 | |
|
Textiles — Determination of the slippage resistance of yarns at a seam in woven fabrics — Part 2: Fixed load method
|
90.93 | |
|
Textiles — Determination of the slippage resistance of yarns at a seam in woven fabrics — Part 3: Needle clamp method
|
90.93 | |
|
Textiles — Tear properties of fabrics — Part 1: Determination of tear force using ballistic pendulum method (Elmendorf)
|
90.93 | |
|
Textiles — Tear properties of fabrics — Part 1: Determination of tear force using ballistic pendulum method (Elmendorf) — Technical Corrigendum 1
|
60.60 | |
|
Textiles — Tear properties of fabrics — Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method)
|
90.93 | |
|
Textiles — Tear properties of fabrics — Part 3: Determination of tear force of wing-shaped test specimens (Single tear method)
|
90.93 | |
|
Textiles — Tear properties of fabrics — Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test)
|
90.93 | |
|
Textiles — Bursting properties of fabrics — Part 1: Hydraulic method for determination of bursting strength and bursting distension
|
95.99 | |
|
Textiles — Bursting properties of fabrics — Part 1: Hydraulic method for determination of bursting strength and bursting distension
|
90.20 | |
|
Textiles — Bursting properties of fabrics — Part 2: Pneumatic method for determination of bursting strength and bursting distension
|
95.99 | |
|
Textiles — Bursting properties of fabrics — Part 2: Pneumatic method for determination of bursting strength and bursting distension
|
90.20 | |
|
Textiles — Determination of the elasticity of fabrics — Part 1: Strip tests
|
90.93 | |
|
Textiles — Determination of the elasticity of fabrics — Part 1: Strip tests — Amendment 1
|
60.60 | |
|
Textiles — Determination of the elasticity of fabrics — Part 2: Multiaxial tests
|
90.93 | |
|
Textiles — Determination of the elasticity of fabrics — Part 3: Narrow fabrics
|
90.93 | |
|
Textiles — Determination of the elasticity of fabrics — Part 3: Narrow fabrics — Amendment 1
|
40.00 | |
|
Textiles — Determination of fabric deformability by forced mechanical distension
|
60.60 | |
|
Textiles — Fabrics — Determination of width and length
|
90.93 | |
|
Textiles — Biaxial tensile properties of woven fabric — Determination of maximum force and elongation at maximum force using the grab method
|
60.60 | |
|
Textiles and textile products — Guidelines on the determination of the precision of a standard test method by interlaboratory trials
|
60.60 | |
|
Textiles — Determination of the snagging resistance of fabrics — Part 1: Mace test method
|
30.00 |
|
No matching records found. Please try changing the filter settings.