Filter :
Standard and/or project | Stage | TC |
---|---|---|
Acoustics — Standard tuning frequency (Standard musical pitch)
|
90.93 | ISO/TC 43 |
Acoustics — Expression of physical and subjective magnitudes of sound or noise in air
|
95.99 | ISO/TC 43 |
Acoustics — Preferred frequencies for measurements
|
95.99 | ISO/TC 43 |
Acoustics — Preferred frequencies
|
90.93 | ISO/TC 43 |
Acoustics — Measurement of sound absorption in a reverberation room — Amendment 1
|
95.99 | ISO/TC 43/SC 2 |
Withdrawal of ISO/R 357-1963
|
95.99 | ISO/TC 43 |
Withdrawal of ISO/R 495-1966
|
95.99 | ISO/TC 43 |
Acoustics — Methods for calculating loudness — Part 1: Zwicker method
|
90.93 | ISO/TC 43 |
Acoustics — Methods for calculating loudness — Part 2: Moore-Glasberg method
|
90.93 | ISO/TC 43 |
Acoustics — Methods for calculating loudness — Part 3: Moore-Glasberg-Schlittenlacher method
|
60.60 | ISO/TC 43 |
Acoustics — Method for calculating loudness level
|
95.99 | ISO/TC 43 |
Acoustics — Preferred reference quantities for acoustic levels
|
95.99 | ISO/TC 43 |
Acoustics — Preferred reference values for acoustical and vibratory levels
|
95.99 | ISO/TC 43 |
Acoustics — Preferred reference values for acoustical and vibratory levels
|
90.93 | ISO/TC 43 |
Acoustics — Description, measurement and assessment of environmental noise — Part 2: Determination of environmental noise levels
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Description, measurement and assessment of environmental noise — Part 2: Determination of sound pressure levels
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Description, measurement and assessment of environmental noise — Part 3: Objective method for the measurement of prominence of impulsive sounds and for adjustment of L Aeq
|
60.60 | ISO/TC 43/SC 1 |
Acoustics — Description and measurement of physical properties of sonic booms
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels of noise sources — Guidelines for the use of basic standards and for the preparation of noise test codes
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels of noise sources — Guidelines for the use of basic standards
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels of noise sources — Guidelines for the use of basic standards
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels of noise sources — Precision methods for broad-band sources in reverberation rooms
|
95.99 | ISO/TC 43 |
Acoustics — Determination of sound power levels of noise sources — Precision methods for broad-band sources in reverberation rooms
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels of noise sources using sound pressure — Precision methods for reverberation rooms
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels of noise sources using sound pressure — Precision methods for reverberation rooms — Technical Corrigendum 1
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for reverberation test rooms
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels of noise sources — Precision methods for discrete-frequency and narrow-band sources in reverberation rooms
|
95.99 | ISO/TC 43 |
Acoustics — Determination of sound power levels of noise sources — Precision methods for discrete-frequency and narrow-band sources in reverberation rooms
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels of noise sources — Engineering methods for small, movable sources in reverberant fields — Part 1: Comparison method for hard-walled test rooms
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for small movable sources in reverberant fields — Part 1: Comparison method for a hard-walled test room
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for small, movable sources in reverberant fields — Part 2: Methods for special reverberation test rooms
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for small, movable sources in reverberant fields — Part 2: Methods for special reverberation test rooms
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels of noise sources — Engineering methods for special reverberation test rooms
|
95.99 | ISO/TC 43 |
Acoustics — Determination of sound power levels of noise sources — Engineering methods for special reverberation test rooms
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane
|
60.00 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels of noise sources — Engineering methods for free-field conditions over a reflecting plane
|
95.99 | ISO/TC 43 |
Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering method in an essentially free field over a reflecting plane
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane
|
90.92 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels of noise sources — Precision methods for anechoic and semi-anechoic rooms
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels of noise sources using sound pressure — Precision methods for anechoic and hemi-anechoic rooms
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms — Amendment 1
|
60.60 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels of noise sources — Survey method
|
95.99 | ISO/TC 43 |
Acoustics — Determination of sound power levels of noise sources using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels of noise sources using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane — Technical Corrigendum 1
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels of noise sources — Survey method using a reference sound source
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels of noise sources using sound pressure — Comparison method in situ
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering/survey methods for use in situ in a reverberant environment
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Determination of uncertainties associated with sound emission measures — Part 1: Sound power levels determined from sound pressure measurements
|
60.60 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels of noise sources — Requirements for the performance and calibration of reference sound sources
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels — Amendment 1
|
60.60 | ISO/TC 43/SC 1 |
Acoustics — Frequency-weighting characteristic for infrasound measurements
|
90.93 | ISO/TC 43/SC 1 |
Underwater acoustics — measurement of underwater ambient sound
|
40.99 | ISO/TC 43/SC 3 |
Acoustics — Attenuation of sound during propagation outdoors — Part 1: Calculation of the absorption of sound by the atmosphere
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Attenuation of sound during propagation outdoors — Part 2: General method of calculation
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Attenuation of sound during propagation outdoors — Part 2: Engineering method for the prediction of sound pressure levels outdoors
|
60.60 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 3: Precision method for measurement by scanning
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound absorption coefficient and impedance in impedance tubes — Part 1: Method using standing wave ratio
|
90.93 | ISO/TC 43/SC 2 |
Acoustics — Determination of sound absorption coefficient and impedance in impedance tubes — Part 2: Transfer-function method
|
95.99 | ISO/TC 43/SC 2 |
Acoustics — Determination of acoustic properties in impedance tubes — Part 2: Two-microphone technique for normal sound absorption coefficient and normal surface impedance
|
60.60 | ISO/TC 43/SC 2 |
Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 1: Principles and guidelines
|
95.99 | ISO/TC 43/SC 1 |
Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 1: Principles and guidelines
|
90.93 | ISO/TC 43/SC 1 |
Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 2: Dynamic stiffness of elastic supports for translatory motion — Direct method
|
95.99 | ISO/TC 43/SC 1 |
Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
|
90.93 | ISO/TC 43/SC 1 |
Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
|
90.93 | ISO/TC 43/SC 1 |
Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion
|
90.93 | ISO/TC 43/SC 1 |
Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — In-situ determination of insertion loss of outdoor noise barriers of all types
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Noise emitted by machinery and equipment — Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound insulation performances of enclosures — Part 1: Measurements under laboratory conditions (for declaration purposes)
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound insulation performances of enclosures — Part 2: Measurements in situ (for acceptance and verification purposes)
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Measurement of the in situ sound attenuation of a removable screen
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Determination of sound immission from sound sources placed close to the ear — Part 2: Technique using a manikin
|
95.99 | ISO/TC 43 |
Acoustics — Determination of sound insulation performance of cabins — Laboratory and in situ measurements
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Soundscape — Part 1: Definition and conceptual framework
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Soundscape — Part 2: Data collection and reporting requirements
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Soundscape — Part 3: Data analysis
|
90.92 | ISO/TC 43/SC 1 |
Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 1: Sound insulation
|
95.99 | ISO/TC 43/SC 2 |
Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 1: Sound insulation
|
60.60 | ISO/TC 43/SC 2 |
Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 2: Sound absorption
|
60.60 | ISO/TC 43/SC 2 |
Acoustics — Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Impulse sound propagation for environmental noise assessment
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Guidelines for noise control by silencers
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Guidelines for noise control by enclosures and cabins
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Loudness scaling by means of categories
|
90.93 | ISO/TC 43 |
Acoustics — Software for the calculation of sound outdoors — Part 1: Quality requirements and quality assurance
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Software for the calculation of sound outdoors — Part 2: General recommendations for test cases and quality assurance interface
|
60.60 | ISO/TC 43/SC 1 |
Acoustics — Software for the calculation of sound outdoors — Part 3: Recommendations for quality assured implementation of ISO 9613-2 in software according to ISO 17534-1
|
90.92 | ISO/TC 43/SC 1 |
Acoustics — Software for the calculation of sound outdoors — Part 4: Recommendations for a quality assured implementation of the COMMISSION DIRECTIVE (EU) 2015/996 in software according to ISO 17534-1
|
60.60 | ISO/TC 43/SC 1 |
Underwater acoustics — Terminology
|
90.93 | ISO/TC 43/SC 3 |
Acoustics — Objective method for assessing the audibility of tones in noise — Engineering method
|
60.60 | ISO/TC 43/SC 1 |
Acoustics — Objective method for assessing the audibility of tones in noise — Engineering method
|
95.99 | ISO/TC 43/SC 1 |
Acoustics — Hearing aid fitting management — Part 2: Tele-services as part of hearing aid fitting management (tHAFM)
|
60.60 | ISO/TC 43 |
Acoustics — Hearing aid fitting management (HAFM)
|
60.60 | ISO/TC 43 |
Acoustics — Definitions of basic quantities and terms
|
90.93 | ISO/TC 43/SC 1 |
Acoustics — Test methods for the qualification of the acoustic environment — Part 1: Qualification of free-field environments
|
60.60 | ISO/TC 43/SC 1 |
Acoustics — Test methods for the qualification of the acoustic environment — Part 2: Determination of the environmental correction
|
60.60 | ISO/TC 43/SC 1 |
Acoustics — Test methods for the qualification of free-field environments
|
95.99 | ISO/TC 43 |
Acoustics — Test methods for the qualification of free-field environments
|
95.99 | ISO/TC 43/SC 1 |
No matching records found. Please try changing the filter settings.