Подкомитет | Заголовок подкомитета | Опубликованные стандарты | Стандарты, находящиеся на стадии разработки |
---|---|---|---|
ISO/TC 20/SC 1 | Aerospace electrical requirements | 64 | 4 |
ISO/TC 20/SC 4 | Aerospace fastener systems | 96 | 4 |
ISO/TC 20/SC 6 | Standard atmosphere | 8 | 2 |
ISO/TC 20/SC 8 | Aerospace terminology | 18 | 0 |
ISO/TC 20/SC 9 | Air cargo and ground equipment | 75 | 7 |
ISO/TC 20/SC 10 | Aerospace fluid systems and components | 81 | 9 |
ISO/TC 20/SC 13 | Space data and information transfer systems | 86 | 4 |
ISO/TC 20/SC 14 | Space systems and operations | 195 | 41 |
ISO/TC 20/SC 16 | Uncrewed aircraft system | 25 | 17 |
ISO/TC 20/SC 17 | Airport infrastructure | 1 | 1 |
ISO/TC 20/SC 18 | Materials | 6 | 4 |
Фильтр :
Стандарт и/или проект находящийся в компетенции ISO/TC 20 Секретариата(27) | Этап | ICS |
---|---|---|
Withdrawal of ISO/R 10-1955
|
95.99 | |
Aerospace — Lever-operated, two-position, ON/OFF switches — Directions of operation
|
95.99 | |
Withdrawal of ISO/R 47-1957
|
95.99 | |
Withdrawal of ISO/R 103-1959
|
95.99 | |
Withdrawal of ISO/R 130-1959
|
95.99 | |
Withdrawal of ISO/R 222-1961
|
95.99 | |
Withdrawal of ISO 223-1975
|
95.99 | |
Aircraft — Declaration of design and performance for aircraft equipment — Standard form
|
95.99 | |
Aircraft — Sealing wire
|
90.60 | |
Withdrawal of ISO/R 267-1962
|
95.99 | |
Aircraft — Mechanical and electromechanical indicators — General requirements
|
90.60 | |
Aircraft — Heads of lubricating nipples
|
90.93 | |
Withdrawal of ISO/R 414-1965
|
95.99 | |
Withdrawal of ISO/R 440-1969
|
95.99 | |
Marking of aircraft gas cylinders
|
95.99 | |
Withdrawal of ISO/R 469-1966
|
95.99 | |
Withdrawal of ISO/R 470-1966
|
95.99 | |
Withdrawal of ISO/R 474-1966
|
95.99 | |
Aircraft — Propulsion units and components — Methods of numbering and describing direction of rotation
|
95.99 | |
Withdrawal of ISO/R 539-1967
|
95.99 | |
Withdrawal of ISO/R 564-1967
|
95.99 | |
Withdrawal of ISO/R 634-1964
|
95.99 | |
Withdrawal of ISO/R 854-1968
|
95.99 | |
Rolling bearings — Airframe bearings — Characteristics, boundary dimensions, tolerances, static load ratings
|
90.93 | |
Aircraft — Engine nacelle fire extinguisher apertures and doors
|
90.93 | |
Withdrawal of ISO/R 1075-1969
|
95.99 | |
Withdrawal of ISO/R 1076-1969
|
95.99 | |
Withdrawal of ISO/R 1077-1969
|
95.99 | |
Withdrawal of ISO/R 1078-1969
|
95.99 | |
Flight dynamics — Concepts, quantities and symbols — Part 1: Aircraft motion relative to the air
|
95.99 | |
Terms and symbols for flight dynamics — Part 2: Motions of the aircraft and the atmosphere relative to the Earth
|
95.99 | |
Terms and symbols for flight dynamics — Part 3: Derivatives of forces, moments and their coefficients
|
95.99 | |
Terms and symbols for flight dynamics — Part 4: Concepts, quantities and symbols used in the study of aircraft stability and control
|
95.99 | |
Terms and symbols for flight dynamics — Part 4: Concepts, quantities and symbols used in the study of aircraft stability and control — Addendum 1
|
95.99 | |
Terms and symbols for flight dynamics — Part 5: Quantities used in measurements
|
95.99 | |
Withdrawal of ISO 1151-1975
|
95.99 | |
Withdrawal of ISO 1152-1974
|
95.99 | |
Withdrawal of ISO 1153-1972
|
95.99 | |
Withdrawal of ISO/R 1220-1970
|
95.99 | |
Aircraft — Clearance dimensions for tripod jacks
|
95.99 | |
Withdrawal of ISO/R 1468-1970
|
95.99 | |
Withdrawal of ISO/R 1490-1970
|
95.99 | |
Withdrawal of ISO/R 1491-1970
|
95.99 | |
Aerospace — Characteristics of aircraft electrical systems
|
95.99 | |
Withdrawal of ISO/R 1799-1971
|
95.99 | |
Withdrawal of ISO/R 1800-1971
|
95.99 | |
Withdrawal of ISO 1963-1973
|
95.99 | |
Aircraft — Accessory drives and mounting pads
|
90.60 | |
Aerospace — Preformed flexible steel wire rope for aircraft controls — Part 1: Dimensions and loads
|
90.93 | |
Aerospace — Preformed flexible steel wire rope for aircraft controls — Part 2: Technical specification
|
90.93 | |
Flexible steel wire rope for aircraft controls — Technical specification
|
95.99 | |
Aerospace — Mechanical system parts — Preformed flexible steel wire rope for aircraft controls — Technical specification
|
95.99 | |
Aircraft — Zones, access doors and panels — Referencing system
|
95.99 | |
Withdrawal of ISO 2650-1974
|
95.99 | |
Environmental tests for aircraft equipment — Part 1: Ice formation
|
95.99 | |
Withdrawal of ISO 2655-1975
|
95.99 | |
Withdrawal of ISO 2657-1976
|
95.99 | |
Withdrawal of ISO 2658-1975
|
95.99 | |
Environmental tests for aircraft equipment — Part 1: Steady state acceleration
|
95.99 | |
Environmental tests for aircraft equipment — Steady-state acceleration
|
90.60 | |
Environmental tests for aircraft equipment — Part 3.4 : Acoustic vibration
|
95.99 | |
Withdrawal of ISO 2676-1975
|
95.99 | |
Environmental tests for aircraft equipment — Part 1: Insulation resistance and high voltage tests for electrical equipment
|
95.99 | |
Withdrawal of ISO 2684-1975
|
95.99 | |
Aircraft — Environmental conditions and test procedures for airborne equipment — Resistance to fire in designated fire zones
|
95.99 | |
Aircraft — Environmental conditions and test procedures for airborne equipment — Resistance to fire in designated fire zones
|
95.99 | |
Aircraft — Environmental test procedure for airborne equipment — Resistance to fire in designated fire zones
|
90.93 | |
Withdrawal of ISO 2764-1974
|
95.99 | |
Withdrawal of ISO 2765-1974
|
95.99 | |
Aircraft — Tubing outside diameters and thicknesses — Metric dimensions
|
95.99 | |
Aircraft — Pressure fuel dispensing system — Test procedure and limit value for shut-off surge pressure
|
95.99 | |
Aircraft — Environmental conditions and test procedures for airborne equipment
|
95.99 | |
Aircraft — Environmental conditions and test procedures for airborne equipment
|
95.99 | |
Aircraft — Environmental conditions and test procedures for airborne equipment
|
95.99 | |
Aircraft — Environmental conditions and test procedures for airborne equipment
|
90.60 | |
Aircraft — Ball bearings for control cable pulleys — Dimensions and loads
|
95.99 | |
Aircraft — Non-metallic pulleys with ball bearings for control cables — Dimensions and loads
|
95.99 | |
Aerospace process — Anodic treatment of aluminium alloys — Chromic acid process 40 V DC, undyed coating
|
95.99 | |
Aerospace process — Anodic treatment of aluminium alloys — Chromic acid process 20 V DC, undyed coating
|
95.99 | |
Aerospace — Accessory drives and mounting flanges (Metric series) — Part 1: Design criteria
|
95.99 | |
Aerospace — Accessory drives and mounting flanges (Metric series) — Part 2: Dimensions
|
90.93 | |
Aerospace — Wrought aluminium and aluminium alloys — Inspection, testing and supply requirements — Part 1: General requirements
|
95.99 | |
Aerospace — Nuts, hexagonal, slotted (castellated), for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated — Dimensions and masses
|
95.99 | |
Aerospace — Washers, chamfered, with counterbore, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated — Dimensions and masses
|
95.99 | |
Aerospace — Washers, flat, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated — Dimensions and masses
|
95.99 | |
Aerospace — Bolts, thin hexagonal head, for pulleys, close tolerance shank, short thread, in alloy steel and cadmium plated or in titanium alloy and MoS2 lubricated or in corrosion-resistant steel and passivated — Dimensions and masses
|
95.99 | |
Aerospace — Eye-ends, in steel, threaded, for aircraft control wire rope — Dimensions and loads
|
90.60 | |
Aerospace — Eye-ends, in corrosion-resistant steel, swaged on aircraft control wire rope — Dimensions and loads
|
90.60 | |
Aerospace — Turnbarrels, for aircraft control wire rope — Dimensions and loads
|
90.60 | |
Aerospace — Double-shank ball-ends, in corrosion-resistiant steel, swaged on aircraft control wire rope — Dimensions and loads
|
90.60 | |
Aerospace — Ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope — Dimensions and loads
|
90.60 | |
Aerospace — Stud-ends, in corrosion-resistant steel, swaged on aircraft control wire rope — Dimensions and loads
|
90.60 | |
Aerospace — Fork-ends, in steel, threaded, for aircraft control wire rope turnbarrels — Dimensions and loads
|
90.60 | |
Aerospace — Fork-ends, in steel, threaded, for rolling bearings, for aircraft control wire rope — Dimensions and loads
|
90.60 | |
Aerospace — Fork-ends, in corrosion-resistiant steel, swaged on aircraft control wire rope — Dimensions and loads
|
90.60 | |
Aerospace — Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope for rolling bearings — Dimensions and loads
|
90.60 | |
Aerospace — Locking clips, in corrosion-resistant steel, for aircraft control wire rope turnbuckles — Dimensions
|
90.60 | |
Aerospace — Aircraft control wire rope assemblies — Dimensions and end-fitting combinations
|
90.60 | |
Aerospace — Aircraft control wire rope assemblies — Technical specification
|
90.93 | |
Aerospace — Standards for electronic instruments and systems
|
95.99 | |
Aerospace — Standards for electronic instruments and systems
|
95.99 | |
Aerospace — Standards for electronic instruments and systems
|
95.99 | |
Aerospace — Standards for electronic instruments and systems
|
95.99 | |
Aerospace — Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner — Part 1: Metric series
|
95.99 | |
Aerospace — Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner — Part 2: Inch series
|
90.93 | |
Aerospace — Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner — Part 3: Technical specification
|
95.99 | |
Aerospace — End-fittings and turnbarrels for aircraft control wire rope — Technical specification
|
95.99 | |
Aerospace — Airframe needle roller, cylindrical roller and track roller bearings — Technical specification
|
95.99 | |
Aerospace — Airframe needle track roller, yoke type, single-row, sealed — Inch series
|
95.99 | |
Aerospace — Airframe needle track roller, yoke type, double-row, sealed — Inch series
|
95.99 | |
Aerospace — Airframe needle roller bearings, single-row, shielded — Inch series
|
95.99 | |
Aerospace — Airframe needle track roller, stud type, single-row, sealed — Inch series
|
95.99 | |
Aerospace — Airframe needle track roller, yoke type, single-row, sealed — Metric series
|
95.99 | |
Aerospace — Airframe needle track roller, stud type, single-row, sealed — Metric series
|
95.99 | |
Aerospace — Airframe rolling bearings: ball and spherical roller bearings — Technical specification
|
95.99 | |
Aerospace — Airframe spherical roller bearings, single row, self-aligning, diameter series 3 and 4 — Metric series
|
95.99 | |
Aerospace — Airframe spherical roller bearings, single row, self-aligning, shielded, intermediate duty — Metric series
|
95.99 | |
Aerospace — Airframe spherical roller bearings, single row, self-aligning, sealed, extended inner ring intermediate duty — Inch series
|
95.99 | |
Aerospace — Airframe spherical roller bearings, double row, self-aligning, sealed, extended inner ring, heavy duty — Inch series
|
95.99 | |
Aerospace — Airframe spherical roller bearings, double row, self-aligning, sealed, torque tube design, light duty — Inch series
|
95.99 | |
Aerospace — Airframe spherical roller bearings, double row, self-aligning, sealed, plain inner ring, heavy duty — Inch series
|
95.99 | |
Aerospace — Airframe spherical roller bearings, single row, self-aligning, sealed, intermediate duty — Inch series
|
95.99 | |
Aerospace — Airframe ball bearings, double-row, self-aligning, diameter series 2 — Metric series
|
95.99 | |
Aerospace — Airframe ball bearings, single-row, rigid, diameter series 0 and 2 — Metric series
|
95.99 | |
Aerospace — Airframe ball bearings, single-row, rigid, diameter series 8 and 9 — Metric series
|
95.99 | |
Aerospace — Airframe ball bearings, double-row, rigid, diameter series 0 — Metric series
|
95.99 | |
Aerospace — Airframe ball bearings, single-row, rigid, sealed, light duty — Inch series
|
95.99 | |
Aerospace — Airframe ball bearings, single-row, rigid, precision, sealed, light duty — Inch series
|
95.99 | |
Aerospace — Airframe ball bearings, single-row, rigid, sealed, intermediate duty — Inch series
|
95.99 | |
Aerospace — Airframe ball bearings, single-row, rigid, precision, sealed, intermediate duty — Inch series
|
95.99 | |
Aerospace — Airframe ball bearings, single-row, rigid, sealed, torque tube design, light duty — Inch series
|
95.99 | |
Aerospace — Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, light duty — Inch series
|
95.99 | |
Aerospace — Airframe ball bearings, single-row, rigid, sealed, torque tube design, extra-light duty — Inch series
|
95.99 | |
Aerospace — Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, extra-light duty — Inch series
|
95.99 | |
Aerospace — Airframe ball bearings, double-row, rigid, sealed, heavy duty — Inch series
|
95.99 | |
Aerospace — Airframe ball bearings, double-row, rigid, precision, sealed, heavy duty — Inch series
|
95.99 | |
Aerospace — Airframe ball bearings, double-row, self-aligning, sealed, heavy duty — Inch series
|
95.99 | |
Aerospace — Airframe ball bearings, double-row, self-aligning, precision, sealed, heavy duty — Inch series
|
95.99 | |
Aerospace — Airframe ball bearings, single-row, self-aligning, sealed, heavy duty — Inch series
|
95.99 | |
Aerospace — Airframe ball bearings, single-row, self-aligning, precision, sealed, heavy duty — Inch series
|
95.99 | |
Aerospace — Airframe ball bearings, single-row, self-aligning, sealed, light duty — Inch series
|
95.99 | |
Aerospace — Airframe ball bearings, single-row, self-aligning, precision, sealed, light duty — Inch series
|
95.99 | |
Aircraft and space — Industrial data — Product identification and traceability
|
95.99 | |
Aircraft — Integrated data processing materials management — Bar coding
|
95.99 | |
Aircraft and space — Industrial data — Product identification and traceability
|
60.60 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.