Фильтр :
Стандарт и/или проект | Этап | ТК |
---|---|---|
Withdrawal of ISO/R 15/1-1968 |
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 15/2-1970 |
95.99 | ISO/TC 4 |
Rolling bearings — Radial bearings — Boundary dimensions — General plan |
95.99 | ISO/TC 4 |
Rolling bearings — Radial bearings — Boundary dimensions — General plan — Addendum 1: Diameter series 7 (d greater than or equal to 12 mm and less than or equal to 30 mm) |
95.99 | ISO/TC 4 |
Rolling bearings — Radial bearings — Boundary dimensions, general plan |
95.99 | ISO/TC 4 |
Rolling bearings — Radial bearings — Boundary dimensions, general plan |
95.99 | ISO/TC 4 |
Rolling bearings — Radial bearings — Boundary dimensions, general plan |
90.93 | ISO/TC 4 |
Rolling bearings — Static load ratings |
95.99 | ISO/TC 4 |
Rolling bearings — Static load ratings |
95.99 | ISO/TC 4/SC 8 |
Rolling bearings — Static load ratings — Amendment 1: Annex A (informative) — Discontinuities in the calculation of basic static load ratings |
95.99 | ISO/TC 4/SC 8 |
Rolling bearings — Static load ratings |
90.93 | ISO/TC 4/SC 8 |
Rolling bearings — Static load ratings — Amendment 1 |
60.60 | ISO/TC 4/SC 8 |
Rolling bearings — Thrust bearings with flat back faces — Boundary dimensions |
95.99 | ISO/TC 4 |
Rolling bearings — Thrust bearings — Boundary dimensions, general plan |
95.99 | ISO/TC 4 |
Rolling bearings — Thrust bearings — Boundary dimensions, general plan |
95.99 | ISO/TC 4 |
Rolling bearings — Thrust bearings — Boundary dimensions, general plan |
90.93 | ISO/TC 4 |
Rolling bearing accessories — Part 1: Tapered sleeves |
95.99 | ISO/TC 4 |
Rolling bearing accessories — Part 2: Plummer block housings |
95.99 | ISO/TC 4 |
Rolling bearings — Plummer block housings — Boundary dimensions |
95.99 | ISO/TC 4 |
Rolling bearings — Plummer block housings — Boundary dimensions |
95.99 | ISO/TC 4 |
Rolling bearings — Plummer block housings — Boundary dimensions |
90.93 | ISO/TC 4 |
Withdrawal of ISO/R 199-1961 |
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 199-1968 |
95.99 | ISO/TC 4 |
Rolling bearings — Thrust ball bearings — Tolerances |
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Thrust bearings — Tolerances |
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Thrust bearings — Tolerances |
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Thrust bearings — Geometrical product specification (GPS) and tolerance values |
90.92 | ISO/TC 4/SC 4 |
Rolling bearings — Thrust bearings — Geometrical product specification (GPS) and tolerance values |
50.20 | ISO/TC 4/SC 4 |
Withdrawal of ISO/R 200-1961 |
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 201-1961 |
95.99 | ISO/TC 4 |
Cylindrical roller bearings — Separate thrust collars — Boundary dimensions |
95.99 | ISO/TC 4 |
Rolling bearings — Cylindrical roller bearings, separate thrust collars — Boundary dimensions |
95.99 | ISO/TC 4 |
Rolling bearings — Cylindrical roller bearings, separate thrust collars — Boundary dimensions |
90.60 | ISO/TC 4/SC 5 |
Rolling bearings — Dynamic load ratings and rating life — Part 1: Calculation methods |
95.99 | ISO/TC 4 |
Rolling bearings — Dynamic load ratings and rating life |
95.99 | ISO/TC 4/SC 8 |
Rolling bearings — Dynamic load ratings and rating life — Amendment 1 |
95.99 | ISO/TC 4/SC 8 |
Rolling bearings — Dynamic load ratings and rating life — Amendment 2: Life modification factor aXYZ |
95.99 | ISO/TC 4/SC 8 |
Rolling bearings — Dynamic load ratings and rating life |
90.93 | ISO/TC 4/SC 8 |
Withdrawal of ISO/R 300/I-1963 |
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 300/II-1965 |
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 300/III-1968 |
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 355/1-1963 |
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 355/2-1965 |
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 355/3-1967 |
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 355/4-1968 |
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 355/5-1969 |
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 355/6-1970 |
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 355/7-1970 |
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 355/8-1973 |
95.99 | ISO/TC 4 |
Rolling bearings — Metric tapered roller bearings — Boundary dimensions and series designations |
95.99 | ISO/TC 4 |
Rolling bearings — Metric tapered roller bearings — Boundary dimensions and series designations — Addendum 1 |
95.99 | ISO/TC 4 |
Rolling bearings — Metric tapered roller bearings — Boundary dimensions and series designations — Addendum 2 |
95.99 | ISO/TC 4 |
Rolling bearings — Tapered roller bearings — Boundary dimensions and series designations |
95.99 | ISO/TC 4 |
Rolling bearings — Tapered roller bearings — Boundary dimensions and series designations — Amendment 1 |
95.99 | ISO/TC 4 |
Rolling bearings — Tapered roller bearings — Boundary dimensions and series designations |
60.60 | ISO/TC 4/SC 5 |
Rolling bearings with locating snap ring — Dimensions |
95.99 | ISO/TC 4 |
Rolling bearings — Radial bearings with locating snap ring — Dimensions and tolerances |
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Radial bearings with locating snap ring — Dimensions, geometrical product specifications (GPS) and tolerance values |
90.93 | ISO/TC 4/SC 4 |
Withdrawal of ISO/R 465-1965 |
95.99 | ISO/TC 4 |
Radial bearings — Tolerances |
95.99 | ISO/TC 4 |
Rolling bearings — Radial bearings — Tolerances |
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Radial bearings — Tolerances |
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Radial bearings — Tolerances |
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values |
90.92 | ISO/TC 4/SC 4 |
Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values |
50.20 | ISO/TC 4/SC 4 |
Withdrawal of ISO/R 533-1966 |
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 577/1-1967 |
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 477/2-1968 |
95.99 | ISO/TC 4 |
Withdrawal of ISO 477/3-1973 |
95.99 | ISO/TC 4 |
Rolling bearings — Tapered roller bearings — Inch series — Tolerance classes 4 (normal tolerances), 3, 0 and 00 |
95.99 | ISO/TC 4 |
Tapered roller bearings — Inch series — Tolerances |
95.99 | ISO/TC 4 |
Rolling bearings — Metric series — Chamfer dimension limits |
95.99 | ISO/TC 4 |
Rolling bearings — Chamfer dimensions — Maximum values |
90.92 | ISO/TC 4/SC 4 |
Rolling bearings — Chamfer dimensions — Maximum values — Amendment 1 |
60.60 | ISO/TC 4/SC 4 |
Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels |
95.99 | ISO/TC 17/SC 4 |
Heat-treatable steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels |
50.00 | ISO/TC 17/SC 4 |
Withdrawal of ISO/R 1038-1969 |
95.99 | ISO/TC 4 |
Tapered roller bearings — Inch series — Chamfer dimension limits |
95.99 | ISO/TC 4 |
Rolling bearings — Tolerances — Part 1: Terms and definitions |
90.93 | ISO/TC 4/SC 4 |
Rolling bearings — Tolerances — Part 2: Measuring and gauging principles and methods |
90.93 | ISO/TC 4/SC 4 |
Rolling bearings — Tolerances — Definitions |
95.99 | ISO/TC 4 |
Rolling bearings for railway axle-boxes — Acceptance inspection |
95.99 | ISO/TC 4 |
Needle roller bearings — Light and medium series — Dimensions and tolerances |
95.99 | ISO/TC 4 |
Rolling bearings — Needle roller bearings, dimension series 48, 49 and 69 — Boundary dimensions and tolerances |
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Needle roller bearings, dimension series 48, 49 and 69 — Boundary dimensions and tolerances — Amendment 1: Tolerances for shaft raceway |
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Needle roller bearings with machined rings — Boundary dimensions, geometrical product specifications (GPS) and tolerance values |
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Needle roller bearings with machined rings — Boundary dimensions, geometrical product specifications (GPS) and tolerance values — Amendment 1: Measuring and verification methods |
50.98 | ISO/TC 4/SC 5 |
Rolling bearings — Needle roller bearings with machined rings — Boundary dimensions, geometrical product specifications (GPS) and tolerance values |
60.60 | ISO/TC 4/SC 5 |
Rolling bearings — Needle roller bearings with machined rings — Boundary dimensions, geometrical product specifications (GPS) and tolerance values — Amendment 2 |
30.99 | ISO/TC 4/SC 5 |
Rolling bearings — Instrument precision bearings — Part 1: Boundary dimensions, tolerances and characteristics of metric series bearings |
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Instrument precision bearings — Part 2: Boundary dimensions, tolerances and characteristics of inch series bearings |
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Instrument precision bearings |
95.99 | ISO/TC 4 |
Rolling bearings — Instrument precision bearings |
95.99 | ISO/TC 4 |
Rolling bearings — Explanatory notes on ISO 281 — Part 1: Basic dynamic load rating and basic rating life |
95.99 | ISO/TC 4/SC 8 |
Rolling bearings — Explanatory notes on ISO 281 — Part 1: Basic dynamic load rating and basic rating life — Technical Corrigendum 1 |
95.99 | ISO/TC 4/SC 8 |
Rolling bearings — Explanatory notes on ISO 281 — Part 1: Basic dynamic load rating and basic rating life |
60.60 | ISO/TC 4/SC 8 |
Rolling bearings — Explanatory notes on ISO 281 — Part 2: Modified rating life calculation, based on a systems approach to fatigue stresses |
60.60 | ISO/TC 4/SC 8 |
Rolling bearings — Explanatory notes on ISO 281 — Part 2: Modified rating life calculation, based on a systems approach to fatigue stresses — Technical Corrigendum 1 |
60.60 | ISO/TC 4/SC 8 |
Withdrawal of ISO/R 1646-1970 |
95.99 | ISO/TC 4 |
Withdrawal of ISO/R 1648-1971 |
95.99 | ISO/TC 4 |
Rolling bearings — Bearings with spherical outside surface and extended inner ring width |
95.99 | ISO/TC 4 |
Withdrawal of ISO 2265-1972 |
95.99 | ISO/TC 4 |
Withdrawal of ISO 2316-1973 |
95.99 | ISO/TC 4 |
Rolling bearings — Tapered roller bearings — Sub-units — Tolerances — Metric series, normal tolerance class and tolerance class 6 — Inch series, tolerance class 4 (normal tolerance class) |
95.99 | ISO/TC 4 |
Rolling bearings — Accessories — Part 1: Tapered sleeves — Dimensions |
95.99 | ISO/TC 4 |
Rolling bearings — Accessories — Part 1: Dimensions for adapter sleeve assemblies and withdrawal sleeves |
90.93 | ISO/TC 4 |
Rolling bearings — Accessories — Part 2: Locknuts and locking devices — Dimensions |
95.99 | ISO/TC 4 |
Rolling bearings — Accessories — Part 2: Locknuts and locking devices — Dimensions |
95.99 | ISO/TC 4 |
Rolling bearings — Accessories — Part 2: Dimensions for locknuts and locking devices |
90.93 | ISO/TC 4 |
Rolling bearings — Locknuts, narrow series, and lockwashers with straight inner tab |
95.99 | ISO/TC 4 |
Rolling bearings — Locknuts, wide series, and lockwashers with bent inner tab |
95.99 | ISO/TC 4 |
Needle roller bearings — Needle roller and cage assemblies — Metric series — Part 1: Radial needle roller and cage assemblies — Boundary dimensions and tolerances |
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Radial needle roller and cage assemblies — Dimensions and tolerances |
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Radial needle roller and cage assemblies — Boundary dimensions and tolerances |
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Radial needle roller and cage assemblies — Boundary dimensions, geometrical product specifications (GPS) and tolerance values |
60.60 | ISO/TC 4/SC 5 |
Needle roller bearings — Thrust needle roller and cage assemblies, thrust washers — Dimensions and tolerances |
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Thrust needle roller and cage assemblies, thrust washers — Boundary dimensions and tolerances |
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Thrust needle roller and cage assemblies, thrust washers — Boundary dimensions, geometrical product specifications (GPS) and tolerance values |
60.60 | ISO/TC 4/SC 5 |
Needle roller bearings — Needle rollers — Dimensions — Metric series |
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Needle rollers — Dimensions and tolerances |
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Needle rollers — Dimensions and tolerances — Technical Corrigendum 1 |
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Needle rollers — Boundary dimensions, geometrical product specifications (GPS) and tolerance values |
60.60 | ISO/TC 4/SC 5 |
Withdrawal of ISO 3097-1974 |
95.99 | ISO/TC 4 |
Rolling bearings — Bearings with spherical outside surface and extended inner ring width — Eccentric locking collars |
95.99 | ISO/TC 4 |
Rolling bearings — Bearings with spherical outside surface and extended inner ring width — Cast and pressed housings |
95.99 | ISO/TC 4 |
Rolling bearings — Cast and pressed housings for insert bearings |
95.99 | ISO/TC 4/SC 6 |
Rolling bearings — Cast and pressed housings for insert bearings — Boundary dimensions and tolerances |
90.93 | ISO/TC 4/SC 6 |
Rolling bearings — Needle roller bearings, drawn cup, without inner ring — Metric series — Boundary dimensions and tolerances |
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Needle roller bearings, drawn cup without inner rings — Boundary dimensions and tolerances |
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Needle roller bearings, drawn cup without inner ring — Boundary dimensions and tolerances |
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Needle roller bearings with drawn cup and without inner ring — Boundary dimensions, geometrical product specifications (GPS) and tolerance values |
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Needle roller bearings with drawn cup and without inner ring — Boundary dimensions, geometrical product specifications (GPS) and tolerance values — Amendment 1: Measuring and verification methods |
50.98 | ISO/TC 4/SC 5 |
Rolling bearings — Needle roller bearings with drawn cup and without inner ring — Boundary dimensions, geometrical product specifications (GPS) and tolerance values |
60.60 | ISO/TC 4/SC 5 |
Rolling bearings — Balls — Part 1: Steel balls |
95.99 | ISO/TC 4/SC 12 |
Rolling bearings — Balls — Part 1: Steel balls — Technical Corrigendum 1 |
95.99 | ISO/TC 4/SC 12 |
Rolling bearings — Balls — Part 1: Steel balls |
90.93 | ISO/TC 4/SC 12 |
Rolling bearings — Balls — Part 2: Ceramic balls |
95.99 | ISO/TC 4/SC 12 |
Rolling bearings — Balls — Part 2: Ceramic balls |
90.93 | ISO/TC 4/SC 12 |
Rolling bearings — Bearing parts — Balls for rolling bearings |
95.99 | ISO/TC 4 |
Rolling bearings — Balls — Dimensions and tolerances |
95.99 | ISO/TC 4 |
Rolling bearings — Balls — Dimensions and tolerances |
95.99 | ISO/TC 4 |
Rolling bearings — Ceramic rolling elements — Common vocabulary and characteristics of surface imperfections |
30.99 | ISO/TC 4 |
Rolling bearings — Vocabulary |
95.99 | ISO/TC 4 |
Rolling bearings — Vocabulary |
95.99 | ISO/TC 4 |
Rolling bearings — Vocabulary — Amendment 1 |
95.99 | ISO/TC 4 |
Rolling bearings — Vocabulary |
95.99 | ISO/TC 4 |
Rolling bearings — Vocabulary |
60.60 | ISO/TC 4 |
Rolling bearings — Internal clearance — Part 1: Radial internal clearance for radial bearings |
90.93 | ISO/TC 4/SC 4 |
Rolling bearings — Internal clearance — Part 2: Axial internal clearance for four-point-contact ball bearings |
90.93 | ISO/TC 4/SC 4 |
Rolling bearings — Radial internal clearance |
95.99 | ISO/TC 4 |
Rolling bearings — Radial internal clearance |
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Needle rollers — Tolerances |
95.99 | ISO/TC 4 |
Needle roller bearings — Track rollers — Boundary dimensions |
95.99 | ISO/TC 4/SC 5 |
Needle roller bearings — Heavy series — Dimensions and tolerances |
95.99 | ISO/TC 4/SC 5 |
Needle roller bearings — Track rollers — Tolerances |
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Needle roller bearing track rollers — Boundary dimensions and tolerances |
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Needle roller bearing track rollers — Boundary dimensions, geometrical product specifications (GPS) and tolerance values |
60.60 | ISO/TC 4/SC 5 |
Rolling bearings — Test and assessment methods for cleanliness |
30.60 | ISO/TC 4 |
Radial ball bearings with flanged outer ring — Flange dimensions |
95.99 | ISO/TC 4 |
Radial ball bearings with flanged outer ring — Flange dimensions — Technical Corrigendum 1 |
95.99 | ISO/TC 4 |
Rolling bearings — Radial ball bearings with flanged outer ring — Flange dimensions |
95.99 | ISO/TC 4 |
Rolling bearings — Radial ball bearings with flanged outer ring — Flange dimensions |
95.99 | ISO/TC 4/SC 12 |
Rolling bearings — Radial ball bearings with flanged outer ring — Flange dimensions |
60.60 | ISO/TC 4/SC 12 |
Explanatory notes on ISO 281/1-1977 |
95.99 | ISO/TC 4/SC 8 |
Technical drawings — Rolling bearings — Part 1: General simplified representation |
90.93 | ISO/TC 10/SC 6 |
Technical drawings — Rolling bearings — Part 2: Detailed simplified representation |
90.93 | ISO/TC 10/SC 6 |
Rolling bearings — Measuring and gauging principles and methods |
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Insert bearings and eccentric locking collars |
95.99 | ISO/TC 4/SC 6 |
Rolling bearings — Insert bearings and eccentric locking collars — Boundary dimensions and tolerances |
95.99 | ISO/TC 4/SC 6 |
Rolling bearings — Insert bearings and eccentric locking collars — Boundary dimensions and tolerances — Amendment 1: Diameter series 3 |
95.99 | ISO/TC 4/SC 6 |
Rolling bearings — Insert bearings and eccentric locking collars — Geometrical product specifications (GPS) and tolerance values |
60.60 | ISO/TC 4/SC 6 |
Rolling bearings, linear motion, recirculating ball, sleeve type — Metric series |
95.99 | ISO/TC 4/SC 11 |
Rolling bearings — Sleeve type linear ball bearings — Boundary dimensions and tolerances |
90.20 | ISO/TC 4/SC 11 |
Rolling bearings — Sleeve type linear ball bearings — Boundary dimensions and tolerances — Amendment 1 |
60.60 | ISO/TC 4/SC 11 |
Rolling bearings — Metric tapered roller bearings — Designation system |
95.99 | ISO/TC 4 |
Rolling bearings — Tapered roller bearings — Designation system |
90.60 | ISO/TC 4/SC 5 |
Rolling bearings — Tapered roller bearings — Designation system — Amendment 1: Design variant designation and comparison of tolerance class designations for single-row tapered roller bearings |
60.60 | ISO/TC 4/SC 5 |
Explanatory notes on ISO 76 |
95.99 | ISO/TC 4/SC 8 |
Explanatory notes on ISO 76 |
60.60 | ISO/TC 4/SC 8 |
Rolling bearings — Single-row cylindrical roller bearings — Chamfer dimensions for loose rib and non-rib sides |
95.99 | ISO/TC 4 |
Rolling bearings — Single-row cylindrical roller bearings — Chamfer dimensions for loose rib and non-rib sides |
90.60 | ISO/TC 4/SC 5 |
Rolling bearings — Single-row angular contact ball bearings — Chamfer dimensions for outer ring non-thrust side |
95.99 | ISO/TC 4/SC 12 |
Rolling bearings — Single-row angular contact ball bearings — Chamfer dimensions for outer ring non-thrust side |
90.93 | ISO/TC 4/SC 12 |
Rolling bearings — Profiled rail guides for linear motion rolling bearings — Part 1: Boundary dimensions and tolerances for series 1, 2 and 3 |
90.93 | ISO/TC 4/SC 11 |
Rolling bearings — Profiled rail guides for linear motion rolling bearings — Part 2: Boundary dimensions and tolerances for series 4 and 5 |
90.93 | ISO/TC 4/SC 11 |
Rolling bearings — Cylindrical rollers — Part 1: Boundary dimensions, geometrical product specifications (GPS) and tolerance values for steel rollers |
60.60 | ISO/TC 4/SC 5 |
Rolling bearings — Cylindrical rollers — Part 2: Boundary dimensions, geometrical product specifications (GPS) and tolerance values for ceramic rollers |
90.20 | ISO/TC 4/SC 5 |
Rolling bearings — Steel cylindrical rollers — Dimensions and tolerances |
95.99 | ISO/TC 4/SC 5 |
Rolling bearings — Accessories for sleeve type linear ball bearings — Part 1: Boundary dimensions and tolerances for series 1 and 3 |
95.99 | ISO/TC 4/SC 11 |
Rolling bearings — Accessories for sleeve type linear ball bearings — Part 1: Boundary dimensions, geometrical product specifications (GPS) and tolerances for series 1 and 3 |
60.60 | ISO/TC 4/SC 11 |
Rolling bearings — Accessories for sleeve type linear ball bearings — Part 2: Boundary dimensions and tolerances for series 5 |
95.99 | ISO/TC 4/SC 11 |
Rolling bearings — Accessories for sleeve type linear ball bearings — Part 2: Boundary dimensions, geometrical product specifications (GPS) and tolerances for series 5 |
60.60 | ISO/TC 4/SC 11 |
Rolling bearings, linear motion, recirculating ball, sleeve type — Accessories |
95.99 | ISO/TC 4/SC 11 |
Rolling bearings, linear motion, recirculating ball, sleeve type — Accessories — Technical Corrigendum 1 |
95.99 | ISO/TC 4/SC 11 |
Rolling bearings — Linear motion rolling bearings — Part 1: Dynamic load ratings and rating life |
95.99 | ISO/TC 4/SC 8 |
Rolling bearings — Linear motion rolling bearings — Part 1: Dynamic load ratings and rating life |
90.93 | ISO/TC 4/SC 8 |
Rolling bearings — Linear motion rolling bearings — Part 2: Static load ratings |
95.99 | ISO/TC 4/SC 8 |
Rolling bearings — Linear motion rolling bearings — Part 2: Static load ratings |
90.93 | ISO/TC 4/SC 8 |
Rolling bearings — Symbols for quantities |
95.99 | ISO/TC 4 |
Rolling bearings — Symbols for physical quantities |
90.93 | ISO/TC 4 |
Rolling bearings — Symbols for physical quantities — Amendment 1 |
60.60 | ISO/TC 4 |
Rolling bearings — Measuring methods for vibration — Part 1: Fundamentals |
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Measuring methods for vibration — Part 1: Fundamentals |
90.93 | ISO/TC 4 |
Rolling bearings — Measuring methods for vibration — Part 2: Radial ball bearings with cylindrical bore and outside surface |
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Measuring methods for vibration — Part 2: Radial ball bearings with cylindrical bore and outside surface — Technical Corrigendum 1 |
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Measuring methods for vibration — Part 2: Radial ball bearings with cylindrical bore and outside surface |
90.93 | ISO/TC 4 |
Rolling bearings — Measuring methods for vibration — Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface |
95.99 | ISO/TC 4 |
Rolling bearings — Measuring methods for vibration — Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface — Technical Corrigendum 1 |
95.99 | ISO/TC 4/SC 4 |
Rolling bearings — Measuring methods for vibration — Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface |
90.93 | ISO/TC 4 |
Rolling bearings — Measuring methods for vibration — Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface |
95.99 | ISO/TC 4 |
Rolling bearings — Measuring methods for vibration — Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface |
90.93 | ISO/TC 4 |
Rolling bearings — Damage and failures — Terms, characteristics and causes |
95.99 | ISO/TC 4 |
Rolling bearings — Damage and failures — Terms, characteristics and causes |
90.93 | ISO/TC 4 |
Rolling bearings — Thermal speed rating — Calculation and coefficients |
95.99 | ISO/TC 4/SC 8 |
Rolling bearings — Thermal speed rating — Calculation |
90.20 | ISO/TC 4/SC 8 |
Rolling bearings — Methods for calculating the modified reference rating life for universally loaded bearings |
40.00 | ISO/TC 4/SC 8 |
Rolling bearings — Methods for calculating the modified reference rating life for universally loaded bearings |
90.92 | ISO/TC 4/SC 8 |
Rolling bearings — Methods for calculating the modified reference rating life for universally loaded bearings — Technical Corrigendum 1 |
60.60 | ISO/TC 4/SC 8 |
Rolling bearings — Dynamic load ratings and rating life — Discontinuities in the calculating of basic dynamic load ratings |
95.99 | ISO/TC 4/SC 8 |
Rolling bearings — Method for calculating the effective static safety factor for universally loaded rolling bearings |
30.99 | ISO/TC 4/SC 8 |
Rolling bearings — Ceramic bearing balls — Determination of strength by notched ball test |
60.60 | ISO/TC 4/SC 12 |
Spherical plain bearings — Method for the calculation of static and dynamic load ratings |
90.93 | ISO/TC 4/SC 8 |
Rolling bearings — Load ratings for hybrid bearings with rolling elements made of ceramic — Part 1: Dynamic load ratings |
90.93 | ISO/TC 4/SC 8 |
Rolling bearings — Load ratings for hybrid bearings with rolling elements made of ceramic — Part 2: Static load ratings |
90.93 | ISO/TC 4/SC 8 |
Rolling bearings — Radial bearings, retaining slots — Dimensions and tolerances |
95.99 | ISO/TC 4/SC 12 |
Rolling bearings — Radial bearings, retaining slots — Dimensions and tolerances |
95.99 | ISO/TC 4/SC 12 |
Rolling bearings — Radial bearings, retaining slots — Dimensions, geometrical product specifications (GPS) and tolerance values |
60.60 | ISO/TC 4/SC 12 |
Rolling bearings — Aligning thrust ball bearings and aligning seat washers — Boundary dimensions |
90.93 | ISO/TC 4/SC 12 |
Rolling bearings — Noise testing of rolling bearing greases — Part 1: Basic principles, testing assembly and test machine |
60.60 | ISO/TC 4 |
Rolling bearings — Noise testing of rolling bearing greases — Part 2: Test and evaluation method BQ+ |
60.60 | ISO/TC 4 |
Rolling bearings — Noise testing of rolling bearing greases — Part 3: Test and evaluation method MQ |
60.60 | ISO/TC 4 |
Rolling bearings — Noise testing of rolling bearing greases — Part 4: Test and evaluation method NQ |
60.60 | ISO/TC 4 |
Rolling bearings — Geometrical product specifications (GPS) — Symbols, terms and definitions associated with GPS |
40.98 | ISO/TC 4/SC 4 |
Rolling bearings — Geometrical product specifications (GPS) — Terms, definitions and symbols associated with GPS |
40.60 | ISO/TC 4/SC 4 |
Rolling bearings — Parts library — Part 1: Reference dictionary for rolling bearings |
95.99 | ISO/TC 4 |
Rolling bearings — Parts library — Reference dictionary for rolling bearings |
30.99 | ISO/TC 4 |
Rolling bearings — Parts library — Reference dictionary for rolling bearings |
90.92 | ISO/TC 4 |
Rolling bearings — Linear motion rolling bearings — Vocabulary |
90.20 | ISO/TC 4/SC 11 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.