Rubber hoses for agricultural spraying

General purpose rubber agricultural spray hose

Rubber hoses for agricultural spraying

Rubber hoses for agricultural spraying

Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types — Specification — Part 1: Oil-based fluid applications

Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types — Specification — Part 2: Water-based fluid applications

Rubber products — Hoses and hose assemblies — Wire reinforced hydraulic type

Rubber hoses and hose assemblies — Wire-reinforced hydraulic type — Specification

Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification

Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification — Technical Corrigendum 1

Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification

Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification

Rubber hoses and hose assemblies — Part 1: On-shore oil suction and discharge — Specification

Rubber hoses and hose assemblies — Part 2: Ship/dockside discharge — Specification

Rubber hoses for oil suction and discharge

Rubber hose and hose assemblies for oil suction and discharge service — Specification

Rubber hoses for aircraft ground fuelling without static conducting wire

Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling — Specification

Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling — Specification

Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling — Specification

Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling — Specification

Rubber hose for liquefied petroleum gases (LPG)

Rubber hoses and hose assemblies for liquefied petroleum gases (LPG) — Bulk transfer applications — Specification

Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) — Specification

Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 2,5 MPa (25 bar) — Specification

Rubber hose for fuel truck delivery

Rubber hoses for bulk fuel truck delivery — Specification

Rubber hoses and hose assemblies for bulk fuel delivery by truck — Specification

Rubber hoses and hose assemblies for bulk fuel delivery by truck — Specification

Rubber hoses and hose assemblies for bulk fuel delivery by truck — Specification

Welding — Flexible hoses for gas welding and allied processes

Welding — Rubber hoses for welding, cutting and allied processes

Gas welding equipment — Rubber hoses for welding, cutting and allied processes

Gas welding equipment — Rubber hoses for welding, cutting and allied processes

Gas welding equipment — Rubber hoses for welding, cutting and allied processes

Rubber hoses for sand and grit blasting — Specification

Rubber hoses for sand and grit blasting — Specification

Rubber hoses and hose assemblies for sand and grit blasting — Specification

Rubber hoses and hose assemblies — Rubber-covered spiral-wire-reinforced hydraulic types — Specification — Part 1: Oil-based fluid applications

Rubber hoses and hose assemblies — Rubber-covered spiral-wire-reinforced hydraulic types — Specification — Part 2: Water-based fluid applications

Rubber hoses and hose assemblies — Rubber-covered, spiral wire reinforced, hydraulic type

Rubber hoses and hose assemblies — Rubber-covered, spiral wire reinforced, hydraulic type — Specification

Rubber hoses and hose assemblies — Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids — Specification

Rubber hoses and hose assemblies — Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids — Specification

Rubber hoses and hose assemblies — Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids — Specification

Plastics hoses and hose assemblies — Thermoplastics, textile-reinforced, hydraulic type

Plastics hoses and hose assemblies — Thermoplastics, textile-reinforced, hydraulic type — Specification

Plastics hoses and hose assemblies — Textile-reinforced types for hydraulic applications — Specification

Plastics hoses and hose assemblies — Textile-reinforced types for hydraulic applications — Specification

Plastics hoses and hose assemblies — Textile-reinforced types for hydraulic applications — Specification

Plastics hoses and hose assemblies — Textile-reinforced types for hydraulic applications — Specification

Road vehicles — Brake hose assemblies for hydraulic braking systems used with a non-petroleum base hydraulic fluid

Road vehicles — Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid

Road vehicles — Hydraulic braking systems — Simple flare pipes, tapped holes, male fittings and hose end fittings

Rubber hoses and hose assemblies — Textile-reinforced hydraulic types — Specification — Part 1: Oil-based fluid applications

Rubber hoses and hose assemblies — Textile-reinforced hydraulic types — Specification — Part 2: Water-based fluid applications

Rubber products — Hoses and hose assemblies, textile reinforced, for hydraulic purposes

Rubber hoses and hose assemblies — Textile-reinforced hydraulic type — Specification

Rubber hoses and hose assemblies — Textile-reinforced hydraulic types for oil-based or water-based fluids — Specification

Rubber hoses and hose assemblies — Textile-reinforced hydraulic types for oil-based or water-based fluids — Specification

Rubber hoses and hose assemblies — Textile-reinforced hydraulic types for oil-based or water-based fluids — Specification

Rubber hoses and hose assemblies — Textile-reinforced hydraulic types for oil-based or water-based fluids — Specification

Rubber — Coolant hoses and tubing for use on private cars and light commercial vehicles — Specification

Rubber hoses and tubing for cooling systems for internal-combustion engines — Specification

Rubber hoses and tubing for cooling systems for internal-combustion engines — Specification

Rubber hoses and tubing for cooling systems for internal-combustion engines — Specification

Rubber tubing and hoses for fuel circuits for internal combustion engines — Specification — Part 1: Conventional liquid fuels

Rubber tubing and hoses for fuel circuits for internal-combustion engines — Specification — Part 2: Oxygenated fuels

Rubber tubing and hoses for fuel circuits for internal-combustion engines — Specification — Part 3: Oxidized fuels

Rubber and plastics hoses, non-collapsible, for fire-fighting service — Part 1: Semi-rigid hoses for fixed systems

Rubber and plastics hoses, non-collapsible, for fire-fighting service — Part 1: Semi-rigid hoses for fixed systems

Rubber and plastics hoses, non-collapsible, for fire-fighting service — Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles

Rubber and plastics hoses, non-collapsible, for fire-fighting service — Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles

Rubber products — Hoses, non-collapsible, for fire-fighting service

Rubber and plastics hoses and hose assemblies — Methods of measurement of dimensions

Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses and the lengths of hose assemblies

Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses and the lengths of hose assemblies — Amendment 1: Clarification of position at which outside diameter is measured

Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses and the lengths of hose assemblies

Low-pressure flexible connecting assemblies (hose assemblies) for use with medical gas systems

Low-pressure hose assemblies for use with medical gases

Low-pressure hose assemblies for use with medical gases

Low-pressure hose assemblies for use with medical gases — Amendment 1

Anaesthetic and respiratory equipment — Low-pressure hose assemblies for use with medical gases

Anaesthetic and respiratory equipment — Low-pressure hose assemblies for use with medical gases — Amendment 1

Rubber hose and hose assemblies for transferring anhydrous ammonia — Specification

Rubber hose and hose assemblies for transferring anhydrous ammonia — Specification — Technical Corrigendum 1

Rubber hoses and hose assemblies for transferring anhydrous ammonia — Specification

Rubber hoses and hose assemblies for transferring anhydrous ammonia — Specification

Rubber hoses — Measured fuel dispensing — Part 1: Conventional petroleum based fuels — Specification

Rubber hoses and hose assemblies for measured fuel dispensing — Specification

Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems — Specification

Road vehicles — Brake hose assemblies for hydraulic braking systems used with petroleum-base brake fluid

Hydraulic fluid power — Hose assemblies — Method of test

Hydraulic fluid power — Hoses and hose assemblies — Test methods

Hydraulic fluid power — Test methods for hoses and hose assemblies

Aerospace — Fluid systems — Impulse testing of hydraulic hose, tubing and fitting assemblies

Aerospace — Fluid systems — Impulse testing of hydraulic hose, tubing and fitting assemblies

Rubber hose and hose assemblies — Washing-machines and dishwashers — Specification

Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers — Specification

Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers — Specification

Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers — Specification

Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers — Specification

Rubber hoses and hose assemblies for underground mining — Wire-reinforced hydraulic types for coal mining — Specification

Rubber hoses and hose assemblies for underground mining — Wire-reinforced hydraulic types for coal mining — Specification

Rubber hoses and hose assemblies for use in oil burners — Specification

Rubber hoses and hose assemblies for use in oil burners — Specification

Rubber hoses and hose assemblies for use in oil burners — Specification

Rubber hoses and hose assemblies for use in oil burners — Specification

Rubber hoses and hose assemblies for use in oil burners — Specification

Rubber hoses and hose assemblies for rotary drilling and vibration applications — Specification

Rubber hoses and hose assemblies for rotary drilling and vibration applications — Specification

Plastics hoses for suction and low-pressure discharge — Petroleum liquids — Specification

Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids — Specification

Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids — Specification

Polytetrafluoroethylene (PTFE) tubing for aerospace applications — Methods for the determination of the density and relative density

Aircraft — High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE)

Aircraft — High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE)

Rubber and/or plastics hose assemblies for airless paint spraying — Specification

Rubber and/or plastics hoses and hose assemblies for airless paint spraying — Specification

Rubber and/or plastics hoses and hose assemblies for airless paint spraying — Specification

Rubber and/or plastics hoses and hose assemblies for airless paint spraying — Specification

Rubber and plastics hoses and hose assemblies for automotive air conditioning — Specification — Part 1: Refrigerant 12

Rubber and plastics hoses and hose assemblies for automotive air conditioning — Specification — Part 2: Refrigerant 134a

Rubber and plastics hoses and hose assemblies for automotive air conditioning — Specification — Part 3: Refrigerant 1234yf

Rubber and plastics hoses and hose assemblies for automotive air conditioning — Specification — Part 4: Low vibration transmission type for Refrigerant 1234yf

Aerospace fluid systems and components — Vocabulary — Part 1: Hose assemblies

Gas welding equipment — Specification for hose assemblies for equipment for welding, cutting and allied processes

Rubber hoses and hose assemblies for underground mining — Textile-reinforced air and water type

Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles — Specification

Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles — Specification

Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles — Specification

Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles — Specification

Aerospace — Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies — Part 1: Metallic (stainless steel) braid

Aerospace — Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies — Part 2: Non-metallic braid

Aerospace — Polytetrafluoroethylene (PTFE) hose assemblies — Test methods

Aerospace — Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa — Procurement specification

Aerospace — Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 degrees F/3 000 psi (204 degrees C/20 684 kPa) and 204 degrees C/21 000 kPa (400 degrees F/3 046 psi) — Procurement specification

Aerospace — Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 degrees F/3 000 psi (204 degrees C/20 684 kPa) and 204 degrees C/21 000 kPa (400 degrees F/3 046 psi) — Procurement specification

Aerospace — Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa — Procurement specification

Aerospace — Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 °C/21 000 kPa — Procurement specification

Aerospace — Polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/28 000 kPa — Procurement specification

Aerospace — Polytetrafluoroethylene (PTFE) hose assemblies, classification 204 °C/28 000 kPa — Procurement specification

Aerospace — Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 degrees C and 10 500 kPa — Procurement specification

Aerospace — Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 °C and 10 500 kPa — Technical specifications and requirements

Rubber hoses and hose assemblies — Wire-braid-reinforced compact types for hydraulic applications — Specification — Part 1: Oil-based fluid applications

Rubber hoses and hose assemblies — Wire-braid-reinforced compact types for hydraulic applications — Specification — Part 2: Water-based fluid applications

Rubber hoses and hose assemblies — Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification

Rubber hoses and hose assemblies — Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification

Rubber hoses and hose assemblies — Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification

Plastics piping systems for renovation of underground water supply networks — Part 11: Lining with inserted hoses

Rubber and rubber products — Hydraulic hose assemblies — External leakage classification for hydraulic systems

Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification

Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification

Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification

Rubber hoses and hose assemblies for automobile power-steering systems — Specification

Rubber hoses and hose assemblies for automobile power-steering systems — Specification

Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) — Specification

Gas welding equipment — Thermoplastic hoses for welding and allied processes

Rubber and plastics hoses for marine-engine wet-exhaust systems — Specification

Rubber and plastics hoses for marine-engine wet-exhaust systems — Specification — Technical Corrigendum 1

Rubber and plastics hoses for marine-engine wet-exhaust systems — Specification

Rubber and plastics hoses for fuels for internal-combustion engines — Method of test for flammability

Thermoplastic tubing and hoses for automotive use — Part 1: Non-fuel applications

Thermoplastic tubing and hoses for automotive use — Part 1: Non-fuel applications

Thermoplastic tubing and hoses for automotive use — Part 1: Non-fuel applications

Thermoplastic tubing and hoses for automotive use — Part 2: Petroleum-based-fuel applications

Thermoplastic tubing and hoses for automotive use — Part 2: Petroleum-based-fuel applications

Gas welding equipment — Rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of 450 bar

Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)

Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)

Fire-fighting hoses — Rubber and plastics suction hoses and hose assemblies

Fire-fighting hoses — Rubber and plastics suction hoses and hose assemblies — Amendment 1

Fire-fighting hoses — Rubber and plastics suction hoses and hose assemblies

Ships and marine technology — Fire resistance of hose assemblies — Test methods

Ships and marine technology — Fire resistance of hose assemblies — Test methods — Technical Corrigendum 1

Ships and marine technology — Fire resistance of non-metallic hose assemblies and non-metallic compensators — Test methods

Ships and marine technology — Fire resistance of hose assemblies — Requirements for the test bench

Ships and marine technology — Fire resistance of non-metallic hose assemblies and non-metallic compensators — Requirements for the test bench

Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for manually operated hydraulic jacks — Specification

Gas cylinders — Flexible hoses assemblies — Specification and testing

Gas cylinders — Flexible hoses assemblies — Specification and testing

Rubber hoses for automotive turbochargers — Specification

Rubber hoses and tubing for fuel circuits for internal combustion engines — Specification — Part 1: Diesel fuels

Rubber hoses and tubing for fuel circuits for internal combustion engines — Specification — Part 1: Diesel fuels

Rubber hoses and tubing for fuel circuits for internal combustion engines — Specification — Part 2: Gasoline fuels

Rubber hoses and tubing for fuel circuits for internal combustion engines — Specification — Part 2: Gasoline fuels

Rubber and plastics hoses — Determination of abrasion resistance of the outer cover

Cryogenic vessels — Hoses

Cryogenic vessels — Hoses

Cryogenic vessels — Hoses

Thermoplastics hoses and hose assemblies — Wire or synthetic yarn reinforced single-pressure types for hydraulic applications — Specification

Thermoplastic hoses and hose assemblies — Wire or synthetic yarn reinforced single-pressure types for hydraulic applications — Specification

Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals — Specification

Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals — Specification

Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas — Specification

Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas — Specification

Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications — Specification

Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications — Specification

Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications — Specification — Amendment 1

Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications — Specification