Фильтр :
Стандарт и/или проект находящийся в компетенции ISO/TC 45/SC 4 Секретариата | Этап | ICS |
---|---|---|
Withdrawal of ISO/R 1398-1970
|
95.99 | |
Rubber- or plastics-coated fabrics — Accelerated-ageing tests
|
95.99 | |
Rubber- or plastics-coated fabrics — Accelerated-ageing tests
|
95.99 | |
Rubber- or plastics-coated fabrics — Accelerated-ageing tests
|
90.93 | |
Rubber- or plastics-coated fabrics — Determination of resistance to penetration by water
|
95.99 | |
Rubber- or plastics-coated fabrics — Determination of resistance to penetration by water
|
95.99 | |
Rubber- or plastics-coated fabrics — Determination of resistance to penetration by water
|
90.93 | |
Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break
|
95.99 | |
Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break
|
90.93 | |
Rubber, vulcanized — Preferred gradations of properties
|
95.99 | |
Flexible cellular polymeric materials — Determination of tensile strength and elongation at break
|
95.99 | |
Flexible cellular polymeric materials — Determination of tensile strength and elongation at break — Technical Corrigendum 1
|
95.99 | |
Flexible cellular polymeric materials — Determination of tensile strength and elongation at break
|
90.93 | |
Flexible cellular polymeric materials — Determination of compression set
|
95.99 | |
Flexible cellular polymeric materials — Determination of compression set — Amendment 1
|
95.99 | |
Flexible cellular polymeric materials — Determination of compression set
|
90.93 | |
Vulcanized rubber — Guide to storage
|
95.99 | |
Rubber products — Guidelines for storage
|
90.92 | |
Rubber products — Guidelines for storage
|
30.99 | |
Rubber- or plastics-coated fabrics — Standard atmospheres for conditioning and testing
|
90.93 | |
Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 1: Methods for determination of length, width and net mass
|
95.99 | |
Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 1: Methods for determination of length, width and net mass
|
90.93 | |
Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
|
95.99 | |
Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
|
90.93 | |
Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 3: Method for determination of thickness
|
95.99 | |
Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 3: Method for determination of thickness
|
90.93 | |
Rubber threads — Methods of test
|
95.99 | |
Rubber threads — Methods of test
|
95.99 | |
Rubber threads — Methods of test
|
90.93 | |
Rubber- or plastics-coated fabrics — Determination of coating adhesion
|
95.99 | |
Rubber- or plastics-coated fabrics — Determination of coating adhesion
|
95.99 | |
Rubber- or plastics-coated fabrics — Determination of coating adhesion
|
60.60 | |
Polymeric materials, cellular flexible — Determination of hardness (indentation technique)
|
95.99 | |
Flexible cellular polymeric materials — Determination of hardness (indentation technique)
|
95.99 | |
Flexible cellular polymeric materials — Determination of hardness (indentation technique) — Technical Corrigendum 1
|
95.99 | |
Flexible cellular polymeric materials — Determination of hardness (indentation technique)
|
90.93 | |
Flexible and rigid cellular polymeric materials — Accelerated ageing tests
|
95.99 | |
Flexible and rigid cellular polymeric materials — Accelerated ageing tests — Amendment 1
|
95.99 | |
Flexible and rigid cellular polymeric materials — Accelerated ageing tests — Amendment 2
|
95.99 | |
Flexible and rigid cellular polymeric materials — Accelerated ageing tests
|
90.92 | |
Flexible and rigid cellular polymeric materials — Accelerated ageing tests
|
40.99 | |
Rubber- or plastics-coated fabrics — Determination of resistance to ozone cracking under static conditions
|
95.99 | |
Rubber- or plastics-coated fabrics — Determination of resistance to ozone cracking under static conditions
|
60.60 | |
Rubber — Tolerances for products — Part 1: Dimensional tolerances
|
95.99 | |
Rubber — Tolerances for products — Part 1: Dimensional tolerances — Amendment 1: Classification system for flash
|
95.99 | |
Rubber — Tolerances for products — Part 1: Dimensional tolerances
|
90.93 | |
Rubber — Tolerances for products — Part 2: Geometrical tolerances
|
95.99 | |
Rubber — Tolerances for products — Part 2: Geometrical tolerances
|
95.99 | |
Rubber — Tolerances for products — Part 2: Geometrical tolerances
|
60.60 | |
Rubber — Dimensional tolerances for use with products
|
95.99 | |
Rubber- or plastics-coated fabrics — Determination of bursting strength — Part 1: Steel-ball method
|
95.99 | |
Rubber- or plastics-coated fabrics — Determination of bursting strength — Part 1: Steel-ball method
|
60.60 | |
Rubber- or plastics-coated fabrics — Determination of bursting strength — Part 2: Hydraulic method
|
95.99 | |
Rubber- or plastics-coated fabrics — Determination of bursting strength — Part 2: Hydraulic method
|
60.60 | |
Rubber- or plastics-coated fabrics — Determination of bursting strength
|
95.99 | |
Flexible cellular polymeric materials — Determination of fatigue by constant-load pounding
|
95.99 | |
Flexible cellular polymeric materials — Determination of fatigue by constant-load pounding
|
90.60 | |
Polymeric materials, cellular flexible — Determination of stress-strain characteristics in compression — Part 1: Low-density materials
|
90.92 | |
Polymeric materials, cellular flexible — Determination of stress-strain characteristics in compression — Part 1: Low-density materials — Amendment 1
|
60.60 | |
Polymeric materials, cellular flexible — Determination of stress-strain characteristics in compression — Part 1: Low-density materials
|
40.99 | |
Flexible cellular polymeric materials — Determination of stress-strain characteristics in compression — Part 2: High-density materials
|
90.93 | |
Flexible cellular polymeric materials — Determination of stress-strain characteristics in compression — Part 2: High-density materials — Amendment 1
|
60.60 | |
Flexible cellular polymeric materials — Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame
|
90.93 | |
Flexible cellular polymeric materials — Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame — Amendment 1
|
60.60 | |
Rubber building gaskets — Materials in preformed solid vulcanizates used for sealing glazing and panels — Specification
|
95.99 | |
Rubber, vulcanized and thermoplastic — Preformed gaskets used in buildings — Classification, specifications and test methods
|
95.99 | |
Rubber, vulcanized and thermoplastic — Preformed gaskets used in buildings — Classification, specifications and test methods
|
60.60 | |
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
|
95.99 | |
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
|
95.99 | |
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
|
95.99 | |
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
|
95.99 | |
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
|
60.60 | |
Rubber, vulcanized — Preformed compression seals for use between concrete motorway paving sections — Specification for material
|
95.99 | |
Rubber, vulcanized — Preformed joint seals for use between concrete paving sections of highways — Specification
|
90.93 | |
Rubber-coated fabrics — Determination of rubber-to-fabric adhesion — Direct tension method
|
90.93 | |
Polymeric materials, cellular flexible — Determination of air flow permeability
|
90.93 | |
Rubber- or plastics-coated fabrics — Low-temperature impact test
|
95.99 | |
Rubber- or plastics-coated fabrics — Low-temperature impact test
|
60.60 | |
Cellular rubbers and plastics — Determination of dynamic cushioning performance
|
90.93 | |
Cellular rubbers and plastics — Determination of dynamic cushioning performance — Amendment 1
|
60.60 | |
Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 1: Constant rate of tear methods
|
95.99 | |
Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 1: Constant rate of tear methods
|
90.93 | |
Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 2: Ballistic pendulum method
|
95.99 | |
Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 2: Ballistic pendulum method
|
60.60 | |
Fabrics coated with rubber or plastics — Determination of tear resistance
|
95.99 | |
Rubber- or plastics-coated fabrics — Low-temperature bend test
|
95.99 | |
Rubber- or plastics-coated fabrics — Low-temperature bend test
|
90.93 | |
Rubber latex coated fabric gloves — Specification
|
60.60 | |
Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 1: Taber abrader
|
95.99 | |
Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 1: Taber abrader
|
90.93 | |
Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 2: Martindale abrader
|
95.99 | |
Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 2: Martindale abrader
|
60.60 | |
Rubber- or plastics-coated fabrics — Determination of crush resistance
|
90.93 | |
Rubber building gaskets — Materials for preformed solid vulcanized structural gaskets — Specification
|
95.99 | |
Rubber building gaskets — Materials for preformed solid vulcanized structural gaskets — Specification
|
95.99 | |
Rubber building gaskets — Materials for preformed solid vulcanized structural gaskets — Specification
|
60.60 | |
Rubber- or plastics-coated fabrics — Determination of blocking resistance
|
95.99 | |
Rubber- or plastics-coated fabrics — Determination of blocking resistance
|
60.60 | |
Rubber or plastics coated fabrics — Determination of flexibility — Flat loop method
|
90.93 | |
Rubber- or plastics-coated fabrics — Determination of resistance to combined shear flexing and rubbing
|
95.99 | |
Rubber- or plastics-coated fabrics — Determination of resistance to combined shear flexing and rubbing
|
90.93 | |
Polymeric materials, cellular flexible — Polyurethane foam for load-bearing applications excluding carpet underlay — Specification
|
95.99 | |
Flexible cellular polymeric materials — Polyurethane foam for load-bearing applications excluding carpet underlay — Specification
|
95.99 | |
Flexible cellular polymeric materials — Polyurethane foam for load-bearing applications excluding carpet underlay — Specification
|
90.93 | |
Rubber — Compatibility between hydraulic fluids and standard elastomeric materials
|
90.93 | |
Rubber or plastics covered rollers — Specifications — Part 1: Requirements for hardness
|
95.99 | |
Rubber or plastics covered rollers — Specifications — Part 1: Requirements for hardness
|
90.93 | |
Rubber- or plastics-covered rollers — Specifications — Part 2: Surface characteristics
|
95.99 | |
Rubber or plastics covered rollers — Specifications — Part 2: Surface characteristics
|
90.93 | |
Rubber- or plastics-covered rollers — Specifications — Part 3: Dimensional tolerances
|
90.92 | |
Rubber- or plastics-covered rollers — Specifications — Part 3: Dimensional tolerances
|
30.99 | |
Rubber products — Bridge bearings — Specification for rubber materials
|
90.93 | |
Rubber seals — Joint rings used for gas supply pipes and fittings — Specification for material
|
95.99 | |
Rubber seals — Joint rings used for petroleum product supply pipes and fittings — Specification for material
|
95.99 | |
Rubber- or plastics-coated fabrics — Determination of resistance to liquids
|
95.99 | |
Rubber- or plastics-coated fabrics — Determination of resistance to liquids
|
60.60 | |
Plastics coated fabrics — Polyvinyl chloride coatings — Rapid method for checking fusion
|
90.93 | |
Rubber- or plastics-coated fabrics — Determination of fogging characteristics of trim materials in the interior of automobiles
|
95.99 | |
Rubber- or plastics-coated fabrics — Determination of fogging characteristics of trim materials in the interior of automobiles
|
95.99 | |
Rubber- or plastics-coated fabrics — Determination of fogging characteristics of trim materials in the interior of automobiles
|
60.60 | |
Polymeric materials, cellular flexible — Polyvinylchloride foam sheeting — Specification
|
90.93 | |
Flexible cellular polymeric materials — Polyurethane foam for laminate use — Specification
|
95.99 | |
Flexible cellular polymeric materials — Polyurethane foam for laminate use — Specification
|
90.60 | |
Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 1: Sheeting
|
90.93 | |
Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 1: Sheeting — Amendment 1
|
60.60 | |
Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 1: Sheeting — Technical Corrigendum 1: Sheeting
|
60.60 | |
Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 2: Mouldings and extrusions
|
95.99 | |
Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Part 2: Specification for mouldings and extrusions
|
60.60 | |
Rubber- or plastics-coated fabrics — Measurement of gas permeability
|
95.99 | |
Rubber- or plastics-coated fabrics — Measurement of gas permeability
|
95.99 | |
Rubber- or plastics-coated fabrics — Measurement of gas permeability
|
60.60 | |
Polymeric materials, cellular flexible — Method of assessment of air flow value at constant pressure-drop
|
95.99 | |
Polymeric materials, cellular, flexible — Determination of air flow value at constant pressure-drop
|
95.99 | |
Polymeric materials, cellular, flexible — Determination of air flow value at constant pressure-drop
|
60.60 | |
Plastics-coated fabrics for upholstery — Part 1: Specification for PVC-coated knitted fabrics
|
95.99 | |
Plastics-coated fabrics for upholstery — Part 1: Specification for PVC-coated knitted fabrics
|
95.99 | |
Plastics-coated fabrics for upholstery — Part 1: Specification for PVC-coated knitted fabrics
|
60.60 | |
Plastics-coated fabrics for upholstery — Part 2: Specification for PVC-coated woven fabrics
|
95.99 | |
Plastics-coated fabrics for upholstery — Part 2: Specification for PVC-coated woven fabrics
|
90.92 | |
Plastics-coated fabrics for upholstery — Part 2: Specification for PVC-coated woven fabrics
|
30.99 | |
Plastics-coated fabrics for upholstery — Part 3: Specification for polyurethane-coated woven fabrics
|
90.92 | |
Plastics-coated fabrics for upholstery — Part 3: Specification for polyurethane-coated woven fabrics
|
30.99 | |
Rubber materials — Chemical resistance
|
95.99 | |
Rubber materials — Chemical resistance
|
90.93 | |
Rubber or plastics covered rollers — Enquiries and orders — Recommendations for technical information to be supplied by purchaser
|
90.93 | |
Rubber- or plastics-coated fabrics — Determination of resistance to damage by flexing
|
90.93 | |
Flexible cellular polymeric materials — Determination of tear strength
|
95.99 | |
Flexible cellular polymeric materials — Determination of tear strength
|
95.99 | |
Flexible cellular polymeric materials — Determination of tear strength
|
90.92 | |
Flexible cellular polymeric materials — Determination of tear strength
|
30.99 |
|
PVC-coated fabrics for tarpaulins — Specification
|
90.93 | |
Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Part 1: PVC-coated fabrics
|
95.99 | |
Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Part 1: PVC-coated fabrics — Technical Corrigendum 1
|
95.99 | |
Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Part 2: Polyurethane- and silicone elastomer-coated fabrics
|
95.99 | |
Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Part 3: Natural rubber- and synthetic rubber-coated fabrics
|
95.99 | |
Rubber- or plastics-coated fabrics for water-resistant clothing — Specification
|
90.93 | |
Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Technical Corrigendum 1
|
60.60 | |
Flexible cellular polymeric materials — Determination of resilience
|
95.99 | |
Flexible cellular polymeric materials — Determination of resilience by ball rebound
|
95.99 | |
Flexible cellular polymeric materials — Determination of resilience by ball rebound
|
90.93 | |
Rubber- or plastics-covered rollers — Glossary
|
90.93 | |
Rubber seals — Joint rings for hot water supply pipelines up to 110 degrees C — Specification for the material
|
95.99 | |
Rubber seals — Joint rings for pipelines for hot-water supply up to 110 degrees C — Specification for the material
|
95.99 | |
Rubber seals — Joint rings for pipelines for hot-water supply up to 110 °C — Specification for the material
|
90.93 | |
Rubber — Recommendations for the workmanship of pipe joint rings — Description and classification of imperfections
|
90.93 | |
Flexible cellular polymeric materials — Determination of creep in compression
|
90.93 | |
Single-use sterile surgical rubber gloves — Specification
|
95.99 | |
Single-use sterile rubber surgical gloves — Specification
|
95.99 | |
Single-use sterile rubber surgical gloves — Specification — Technical Corrigendum 1
|
95.99 | |
Single-use sterile rubber surgical gloves — Specification
|
95.99 | |
Single-use sterile rubber surgical gloves — Specification
|
60.60 | |
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution
|
95.99 | |
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution — Amendment 1
|
95.99 | |
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution — Technical Corrigendum 1
|
95.99 | |
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution
|
95.99 | |
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution — Amendment 1
|
95.99 | |
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution
|
90.92 | |
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution
|
30.99 |
|
Single-use medical examination gloves — Part 2: Specification for gloves made from poly(vinyl chloride)
|
90.92 | |
Single-use medical examination gloves — Part 2: Specification for gloves made from poly(vinyl chloride)
|
30.99 |
|
Single-use rubber examination gloves — Specification
|
95.99 | |
Flexible cellular polymeric materials — Moulded and extruded sponge or expanded cellular rubber products — Compressibility test on finished parts
|
90.93 | |
Flexible cellular polymeric materials — Moulded and extruded sponge or expanded cellular rubber products — Compressibility test on finished parts — Amendment 1
|
60.60 | |
Flexible cellular polymeric materials — Determination of compression set under humid conditions
|
90.93 | |
Rubber and plastics gloves for food services — Limits for extractable substances
|
90.93 | |
Elastomeric seals — Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
|
95.99 | |
Elastomeric seals — Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
|
90.60 | |
Rubber, vulcanized — Guidelines for material specification
|
60.60 | |
Rubber- or plastics-coated fabrics — Determination of water absorption resistance
|
40.99 | |
Meteorological balloons — Specification
|
95.99 | |
Meteorological balloons — Specification
|
60.60 | |
Rubber or plastic coated fabrics — Mechanical properties — Determination of the elongation under load and the residual deformation
|
30.99 | |
Rubber household gloves — General requirements and test methods
|
90.93 | |
General purpose rubber thread — Specification
|
90.93 | |
Natural rubber latex cleanroom gloves — Specification
|
90.93 | |
Medical gloves — Determination of removable surface powder
|
90.93 | |
Rubber- or plastic-coated fabrics — Physical and mechanical test — Determination of bending force
|
60.60 | |
Elastomeric seismic-protection isolators — Part 1: Test methods
|
95.99 | |
Elastomeric seismic-protection isolators — Part 1: Test methods — Technical Corrigendum 1
|
95.99 | |
Elastomeric seismic-protection isolators — Part 1: Test methods
|
95.99 | |
Elastomeric seismic-protection isolators — Part 1: Test methods
|
95.99 | |
Elastomeric seismic-protection isolators — Part 1: Test methods
|
60.60 | |
Elastomeric seismic-protection isolators — Part 2: Applications for bridges — Specifications
|
95.99 | |
Elastomeric seismic-protection isolators — Part 2: Applications for bridges — Specifications — Technical Corrigendum 1
|
95.99 | |
Elastomeric seismic-protection isolators — Part 2: Applications for bridges — Specifications
|
95.99 | |
Elastomeric seismic-protection isolators — Part 2: Applications for bridges — Specifications
|
95.99 | |
Elastomeric seismic-protection isolators — Part 2: Applications for bridges — Specifications
|
60.60 | |
Elastomeric seismic-protection isolators — Part 3: Applications for buildings — Specifications
|
95.99 | |
Elastomeric seismic-protection isolators — Part 3: Applications for buildings — Specifications — Technical Corrigendum 1
|
95.99 | |
Elastomeric seismic-protection isolators — Part 3: Applications for buildings — Specifications
|
95.99 | |
Elastomeric seismic-protection isolators — Part 3: Applications for buildings — Specifications
|
95.99 | |
Elastomeric seismic-protection isolators — Part 3: Applications for buildings — Specifications
|
60.60 | |
Elastomeric seismic-protection isolators — Part 4: Guidance on the application of ISO 22762-3
|
95.99 | |
Elastomeric seismic-protection isolators — Part 4: Guidance on the application of ISO 22762-3
|
90.93 | |
Elastomeric seismic-protection isolators — Part 5: Sliding seismic-protection isolators for buildings
|
60.60 | |
Elastomeric seismic-protection isolators — Part 6: High-durability and high-performance specifications and test methods
|
60.60 | |
Elastomeric seismic-protection isolators — Part 7: Relationship of the ISO 22762 series to the design and testing of seismic isolation systems
|
60.60 | |
Rubber bands — General requirements and test methods
|
60.60 | |
Rubber sheets for livestock — Dairy cattle — Specification
|
60.60 | |
Nitrile cleanroom gloves — Specification
|
60.60 | |
Flexible cellular polymeric materials — Determination of antibacterial effectiveness
|
60.60 | |
Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers
|
95.99 | |
Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers
|
60.60 | |
Flexible cellular polymeric materials — Determination of fatigue by a constant-strain procedure
|
90.93 | |
Single-use rubber gloves for general applications — Specification
|
95.99 | |
Single-use rubber gloves for general applications — Specification
|
60.60 | |
Rubber- or plastics-coated fabrics — Physical and mechanical tests — Determination of flex resistance by the flexometer method
|
95.99 | |
Rubber- or plastics-coated fabrics — Physical and mechanical tests — Determination of flex resistance by the flexometer method
|
90.93 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.