ISO 18549-2:2009
p
ISO 18549-2:2009
45452

ISO 18549-2:2009 describes two methods for the determination of the time (flow rate) it takes for a given quantity of a heated powder mix, based on iron or steel powders and to be used for warm compaction, to pass through a funnel with a given orifice diameter.

Method A uses a funnel with an orifice of 2,5 mm and a test portion of 50 g and is, to a large extent, based on the method standardized in ISO 4490:2008. The method can only be used for powder mixes that flow freely through the 2,5 mm orifice in the heated condition.

Method B uses a funnel with an orifice of 5 mm and a test portion with a size of 150 g.

Both methods cover a testing temperature range of 60 °C to 180 °C and either of them can be selected after agreement between the parties involved.


Общая информация 

  •  :  Published
     : 2009-04
  •  : 1
  •  : ISO/TC 119/SC 2 Sampling and testing methods for powders (including powders for hardmetals)
  •  :
    77.160 Powder metallurgy

Приобрести данный стандарт

ru
Формат Язык
std 1 38 PDF
std 2 38 Бумажный
  • CHF38

Жизненный цикл


Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)

Будьте в курсе актуальных новостей ИСО

Подписывайтесь на наши новости, обзоры, а также на информацию о продуктах.