ISO 16957:2016

недоступно на русском языке

Опубликовано (Версия 1, 2016)

Последний раз этот стандарт был пересмотрен в 2021. Поэтому данная версия остается актуальной.

ISO 16957:2016

CHF 129

Пересчитать швейцарские франки (CHF) в ваша валюта

Тезис

ISO 16957:2016 describes a method of measuring the thermal conductivity (diffusivity) of a wet porous building material and a method of evaluating the measurement uncertainty.

While ISO 10051 is the current International Standard, based on a steady-state method, ISO 16957:2016 proposes a method that makes use of a non-steady-state method which uses a small temperature change with a short period as an input. Along with the measurement, an evaluation of the measurement uncertainty is described, which makes possible a simple and practical measuring method.

ISO 16957:2016 intends to measure the apparent (effective) thermal conductivity, including latent heat transfer caused by vapour movement. The situation in which moisture and/or air movement occur due to convection or gravity is excluded. The application of ISO 16957:2016 to high moisture content is excluded so that the gravity effect can be neglected. ISO 16957:2016 can be applied to a porous material heavier than about 100 kg/m3, in which radiative heat transfer can be neglected.

It specifies the following:

a) a non-steady-state method of measuring thermal conductivity;

b) an approximation formula for the measurement uncertainty caused by moisture movement and nonuniform moisture distribution (and, thus, a determination of the measuring conditions that satisfy the upper limit of measurement uncertainty);

c) an estimate of the heat transfer caused by moisture (vapour) movement.

Общая информация

Текущий статус
: Опубликовано

Дата публикации
: 2016-06

Этап
: Подтверждение действия между-народного стандарта [90.93]
Версия
: 1
Технический комитет :
ISO/TC 163/SC 1

ICS :
27.220
RSS обновления