ISO 19360:2016
p
ISO 19360:2016
64696
недоступно на русском языке

Текущий статус : Опубликовано (Hа стадии пересмотра)

Последний раз этот стандарт был пересмотрен в  2022. Поэтому данная версия остается актуальной
ru
Формат Язык
std 1 63 PDF
std 2 63 Бумажный
  • CHF63
Пересчитать швейцарские франки (CHF) в ваша валюта

Тезис

Rigging used for marine cranes is mainly wire rope rigging. ISO 19360:2016 specifies the technical requirements of the selection and application of running rigging and standing rigging used for wire rope rigging of marine cranes.

ISO 19360:2016 specifies the minimum requirements of the allowable strength and performance level for wire ropes of marine cranes according to the design, application and maintenance requirements of cranes.

ISO 19360:2016 specifies the implementation criteria of installation, maintenance, inspection and discards for running rigging and standing rigging of marine cranes.

ISO 19360:2016 is applicable to the following types of marine crane:

- deck cranes mounted on ships for handling cargo or containers in harbour or sheltered water conditions;

- floating cranes or grab cranes mounted on barges or pontoons for operating in harbour conditions or sheltered water conditions;

- engine room cranes and provision cranes, etc. mounted on ships (including floating docks) for handling equipment and stores in harbour conditions.

ISO 19360:2016 does not apply to the following:

- loads from accidents or collisions;

- lifting operations below sea level;

- cranes which are supposed to be included in the class of the vessel and where the vessel receives a crane class notation; the contents of this document may be used however, as recommendation or guidance;

- other items where there is the danger that they might be considered in-scope are excluded from this document, such as

  • - loose gear items, such as the hook block, and
  • - ropes and fittings;

- cranes which are to be included in class by the class society;

- minimum ambient operating temperatures no less than −20 °C;

- maximum ambient operating temperatures above +45 °C;

- transport, assembly, dismantling and decommissioning of cranes;

- lifting accessories, i.e. any item between the crane and the load;

- lifting operations involving more than one crane;

- hand powered cranes;

- emergency rescue operations;

- shore-side cargo handling cranes;

- portable cranes on board;

- lifting appliances for lifeboats, liferafts accommodation ladders and pilot ladders;

- launching appliances for survival craft and rescue boats;

- gangways, accommodation and pilot ladders and their handling appliances.

Preview 

Вы можете ознакомиться с данным стандартом в нашей онлайн-библиотеке (OBP)

Общая информация

  •  : Опубликовано
     : 2016-11
    : Подтверждение действия между-народного стандарта [90.93]
  •  : 1
  • ISO/TC 8/SC 4
    47.020.40 
  • RSS обновления

Жизненный цикл

Цели в области устойчивого развития

Данный стандарт разработан для достижения следующих Цель устойчивого развития

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)