ISO/AWI 24012-1
Test of buffer material under coupled thermo-hydro-mechanical conditions for geological disposal of high-level radioactive waste — Part 1: Swelling pressure test
Reference number
ISO/AWI 24012-1
Версия 1
Working draft
u
ISO/AWI 24012-1
87653
Проект данного международного стандарта был подготовлен рабочей группой.

Тезис

This document specifies the test devices, test procedures,data analysis, test report,quality control of swelling pressure test for buffer material under coupled thermo-hydro-mechanical conditions for the geological disposal of high-level radioactive waste. This is one of three key tests of buffer material under these conditions. Specifically, the test temperature range of those tests is from room temperature to 90 ℃, because the buffer material will experience such temperature conditions during early disposal process. This document is Part 1 of a three-part series comprising the following: Part 1 – Swelling pressure test Part 2 – Hydraulic conductivity test Part 3 – Triaxial compression strength test The series is applicable to the whole process of testing of buffer material under coupled thermo-hydro-mechanical conditions for geological disposal of high-level radioactive waste. This document is applicable to the swelling pressure test specifically.

Общая информация

  •  : В стадии разработки
    : Регистрация новой рабочей темы в программе работ ТК/ПК [20.00]
  •  : 1
  • ISO/TC 85/SC 5
  • RSS обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)