Subcommittee Subcommittee Title Published standards Standards under development
ISO/TC 107/SC 3 Electrodeposited coatings and related finishes 26 5
ISO/TC 107/SC 4 Hot dip coatings (galvanized, etc.) 6 1
ISO/TC 107/SC 7 Corrosion tests 15 0
ISO/TC 107/SC 8 Chemical conversion coatings 6 0
ISO/TC 107/SC 9 Physical vapor deposition coatings 6 4
Filter :
Standard and/or project under the direct responsibility of ISO/TC 107 Secretariat Stage ICS
Metallic and oxide coatings — Measurement of coating thickness — Microscopical method
95.99
Metallic and oxide coatings — Measurement of coating thickness — Microscopical method
95.99
Metallic and oxide coatings — Measurement of coating thickness — Microscopical method
60.60
Thermal spraying — Zinc, aluminium and their alloys — Part 1: Design considerations and quality requirements for corrosion protection systems
95.99
Thermal spraying — Zinc, aluminium and their alloys — Part 1: Design considerations and quality requirements for corrosion protection systems
90.60
Thermal spraying — Zinc, aluminium and their alloys — Part 2: Execution of corrosion protection systems
90.92
Thermal spraying — Zinc, aluminium and their alloys — Part 2: Execution of corrosion protection systems
30.00
Metallic coatings — Protection of iron and steel against corrosion — Metal spraying of zinc and aluminium
95.99
Metallic and other inorganic coatings — Thermal spraying — Zinc, aluminium and their alloys
95.99
Thermal spraying — Metallic and other inorganic coatings — Zinc, aluminium and their alloys
95.99
Metallic and other non-organic coatings — Definitions and conventions concerning the measurement of thickness
95.99
Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness
90.93
Surface treatment and metallic coatings — General classification of terms
95.99
Electroplating and related processes — Vocabulary
95.99
Metallic and other inorganic coatings — Surface treatment, metallic and other inorganic coatings — Vocabulary
95.99
Metallic and other inorganic coatings — Surface treatment, metallic and other inorganic coatings — Vocabulary
60.60
Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution
95.99
Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution
95.99
Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution
90.93
Non-magnetic coatings on magnetic substrates — Measurement of coating thickness — Magnetic method
95.99
Non-magnetic coatings on magnetic substrates — Measurement of coating thickness — Magnetic method
90.93
Non-conductive coatings on non-magnetic basis metals — Measurement of coating thickness — Eddy current method
95.99
Non-conductive coatings on non-magnetic electrically conductive basis materials — Measurement of coating thickness — Amplitude-sensitive eddy-current method
95.99
Non-conductive coatings on non-magnetic electrically conductive base metals — Measurement of coating thickness — Amplitude-sensitive eddy-current method
90.93
Electrodeposited nickel coatings on magnetic and non-magnetic substrates — Measurement of coating thickness — Magnetic method
90.92
Electrodeposited nickel coatings on magnetic and non-magnetic substrates — Measurement of coating thickness — Magnetic method
40.60
Vitreous and porcelain enamels — Determination of resistance to citric acid at room temperature
95.99
Vitreous and porcelain enamels — Determination of resistance to citric acid at room temperature
95.99
Vitreous and porcelain enamels for sheet steel — Production of specimens for testing
95.99
Vitreous and porcelain enamels for sheet steel — Production of specimens for testing
95.99
Vitreous and porcelain enamels for cast iron — Production of specimens for testing
95.99
Vitreous and porcelain enamels — Apparatus for testing with acid and neutral liquids and their vapours
95.99
Vitreous and porcelain enamels — Apparatus for testing with alkaline liquids
95.99
Vitreous and porcelain enamels — Apparatus for testing with alkaline liquids
95.99
Vitreous and porcelain enamels — Determination of resistance to boiling citric acid
95.99
Vitreous and porcelain enamels — Determination of resistance to boiling citric acid
95.99
Vitreous and porcelain enamels — Determination of resistance to boiling hydrochloric acid
95.99
Vitreous and porcelain enamels — Determination of resistance to condensing hydrochloric acid vapour
95.99
Vitreous and porcelain enamels — Determination of resistance to boiling water and water vapour
95.99
Vitreous and porcelain enamels — Determination of resistance to boiling water and water vapour
95.99
Vitreous and porcelain enamels — Determination of resistance to hot sodium hydroxide
95.99
Vitreous and porcelain enamels — Determination of resistance to hot sodium hydroxide
95.99
Vitreous and porcelain enamels — Enamelled articles for service under highly corrosive conditions — High voltage test
95.99
Vitreous and porcelain enamels — Enamelled articles for service under highly corrosive conditions — High voltage test
95.99
Vitreous and porcelain enamels — High voltage test
90.93
Vitreous and porcelain enamels — Enamelled cooking utensils — Determination of resistance to thermal shock
95.99
Vitreous and porcelain enamels — Enamelled cooking utensils — Determination of resistance to thermal shock
90.93
Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion
95.99
Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion
90.93
Metallic coatings — Measurement of coating thickness — X-ray spectrometric methods
95.99
Metallic coatings — Measurement of coating thickness — X-ray spectrometric methods
95.99
Metallic coatings — Measurement of coating thickness — X-ray spectrometric methods
90.93
Metallic and non-metallic coatings — Measurement of thickness — Beta backscatter method
95.99
Metallic and non-metallic coatings — Measurement of thickness — Beta backscatter method
90.93
Metallic and non-metallic coatings — Measurement of thickness — Beta backscatter method — Technical Corrigendum 1
60.60
Chromate conversion coatings on zinc and cadmium — Test methods
95.99
Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys — Test methods
95.99
Metallic and other inorganic coatings — Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys — Test methods
95.99
Metallic and other inorganic coatings — Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys — Test methods
60.60
Metallic and other non-organic coatings — Measurement of coating thicknesses — Fizeau multiple-beam interferometry method
90.93
Metallic and other non-organic coatings — Review of methods of measurement of thickness
95.99
Metallic and other non-organic coatings — Review of methods of measurement of thickness
95.99
Metallic and other inorganic coatings — Review of methods of measurement of thickness
95.99
Metallic and other inorganic coatings — Review of methods of measurement of thickness
60.60
Conversion coatings on metallic materials — Determination of coating mass per unit area — Gravimetric methods
95.99
Conversion coatings on metallic materials — Determination of coating mass per unit area — Gravimetric methods
90.93
High velocity oxygen fuel (HVOF) cermet coatings for metallurgical roll components — Guidance with requirements
60.60
Metallic and related coatings — Vickers and Knoop microhardness tests
95.99
Metallic coatings — Measurement of coating thickness — Profilometric method
95.99
Metallic coatings — Measurement of coating thickness — Profilometric method
60.60
Electrodeposited metallic coatings and related finishes — Sampling procedures for inspection by attributes
90.93
Vitreous and porcelain enamel finishes — Selection of test methods for vitreous and porcelain enamelled areas of articles
95.99
Vitreous and porcelain enamel finishes — Guide to selection of test methods for vitreous and porcelain enamelled areas of articles
95.99
Vitreous and porcelain enamel finishes — Selection of test methods for vitreous and porcelain enamelled areas of articles
60.60
Vitreous and porcelain enamelled manufactured articles — Determination of resistance to heat
95.99
Vitreous and porcelain enamelled manufactured articles — Determination of resistance to heat
60.60
Vitreous and porcelain enamels — Release of lead and cadmium from enamelled ware in contact with food — Part 1: Method of test
95.99
Vitreous and porcelain enamels — Release of lead and cadmium from enamelled ware in contact with food — Part 2: Permissible limits
95.99
Vitreous and porcelain enamels — Release from enamelled articles in contact with food — Methods of test and limits
95.99
Vitreous and porcelain enamels — Release from enamelled articles in contact with food — Methods of test and limits
60.60
Vitreous and porcelain enamels — Determination of the resistance of enamelled articles to impact — Pistol test
90.93
Vitreous and porcelain enamels — Determination of resistance to hot detergent solutions used for washing textiles
95.99
Vitreous and porcelain enamels — Determination of fluidity behaviour — Fusion flow test
95.99
Vitreous and porcelain enamels — Determination of fluidity behaviour — Fusion flow test
90.93
Vitreous and porcelain enamels — Apparatus for determination of resistance to hot detergent solutions used for washing textiles
95.99
Vitreous and porcelain enamels — Determination of the resistance to abrasion — Part 1: Abrasion testing apparatus
90.93
Vitreous and porcelain enamels — Determination of the resistance to abrasion — Part 2: Loss in mass after sub-surface abrasion
95.99
Vitreous and porcelain enamels — Determination of the resistance to abrasion — Part 2: Loss in mass after sub-surface abrasion
95.99
Vitreous and porcelain enamels — Determination of the resistance to abrasion — Part 2: Loss in mass after sub-surface abrasion
60.60
Vitreous and porcelain enamels — Determination of surface scratch hardness according to the Mohs scale
60.60
Metallic coatings for electromagnetic interference shielding — Designation and characterization method
60.60
Atomic layer deposition — Vocabulary
60.60
Vitreous and porcelain enamels — Low-voltage test for detecting and locating defects — Part 1: Swab test for non-profiled surfaces
60.60
Vitreous and porcelain enamels — Low-voltage test for detecting and locating defects — Part 2: Slurry test for profiled surfaces
90.93
Vitreous and porcelain enamels — Low voltage test for detecting and locating defects
95.99
Vitreous and porcelain enamels — Low voltage test for detecting and locating defects
95.99
Vitreous and porcelain enamels — Determination of resistance to sulfuric acid at room temperature
95.99
Vitreous and porcelain enamels — Determination of resistance to sulfuric acid at room temperature
95.99
Vitreous and porcelain enamels — Method of test of self-cleaning properties
90.93
Metallic coatings — Review of methods of measurement of ductility
95.99
Metallic coatings — Review of methods of measurement of ductility
90.93
Metallic coatings — Measurement of coating thickness — Scanning electron microscope method
95.99
Metallic coatings — Measurement of coating thickness — Scanning electron microscope method
60.60
Metallic and other inorganic coatings — Measurement of mass per unit area — Review of gravimetric and chemical analysis methods
95.99
Metallic and other inorganic coatings — Measurement of mass per unit area — Review of gravimetric and chemical analysis methods
90.93
Metallic and other inorganic coatings — Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods — Inclined wedge method
90.93
Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing
95.99
Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing
90.60
Thermal spraying — Components with thermally sprayed coatings — Technical supply conditions
90.93
Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings
95.99
Thermal spraying — Thermally sprayed coatings — Symbolic representation on drawings
60.60
Thermal spraying — Recommendations for thermal spraying
90.93
Metallic and other inorganic coatings — Thermal spray coordination — Tasks and responsibilities
90.93
Metallic and other inorganic coatings — Test method of cyclic heating for thermal-barrier coatings under temperature gradient
90.93
Vitreous and porcelain enamels for aluminium — Production of specimens for testing
95.99
Vitreous and porcelain enamels for aluminium — Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)
90.93
Vitreous and porcelain enamels — Corrosion tests in closed systems
95.99
Vitreous and porcelain enamels — Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry
95.99
Vitreous and porcelain enamels — Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry — Technical Corrigendum 1
95.99
Vitreous and porcelain enamels — Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry
60.60
Metallic and other inorganic coatings — Determination of thermal diffusivity of thermally sprayed ceramic coatings by laser flash method
90.93
Metallic and other inorganic coatings — Test methods for measuring thermal cycle resistance and thermal shock resistance for thermal barrier coatings
90.93
Thermal spraying — Acceptance inspection of thermal spraying equipment
90.93
Thermal spraying — Powders — Part 1: Characterization and technical supply conditions
90.92
Thermal spraying — Powders — Part 1: Characterization and technical supply conditions
30.00
Thermal spraying — Powders — Part 2: Comparison of coating performance and spray powder chemistry
60.60
Thermal spraying — Powders — Composition and technical supply conditions
95.99
Metallic coatings on non-metallic basis materials — Measurement of coating thickness — Micro-resistivity method
60.60
Thermal spraying — Determination of tensile adhesive strength
95.99
Thermal spraying — Determination of tensile adhesive strength
90.93
Thermal spraying — Terminology, classification
95.99
Thermal spraying — Terminology, classification
90.93
Thermal spraying — Approval testing of thermal sprayers
95.99
Thermal spraying — Qualification testing of thermal sprayers
90.92
Thermal spraying — Qualification testing of thermal sprayers
30.00
Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification — Technical supply conditions
95.99
Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification — Technical supply conditions
95.99
Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification and technical supply conditions
60.60
Thermal spraying — Spraying and fusing of self-fluxing alloys
95.99
Thermal spraying — Spraying and fusing of self-fluxing alloys
95.99
Thermal spraying — Spraying and fusing of self-fluxing alloys
60.60
Thermal spraying — Procedures for the application of thermally sprayed coatings for engineering components
95.99
Thermal spraying — Procedures for the application of thermally sprayed coatings for engineering components
90.93
Thermal spraying — Quality requirements of thermally sprayed structures — Part 1: Guidance for selection and use
95.99
Thermal spraying — Quality requirements of thermally sprayed structures — Part 2: Comprehensive quality requirements
95.99
Thermal spraying — Quality requirements of thermally sprayed structures — Part 3: Standard quality requirements
95.99
Thermal spraying — Quality requirements of thermally sprayed structures — Part 4: Elementary quality requirements
95.99
Thermal spraying — Quality requirements for manufacturers of thermal sprayed coatings
60.60
Thermal spraying — Characterization and testing of thermally sprayed coatings
90.93
Thermal spraying — Post-treatment and finishing of thermally sprayed coatings
90.93
Vitreous and porcelain enamels — Determination of scratch resistance of enamel finishes
90.20
Vitreous and porcelain enamels — Determination of scratch resistance of enamel finishes — Technical Corrigendum 1
60.60
Metallic and other inorganic coatings — Electrochemical measurement of diffusible hydrogen in steels — Barnacle electrode method
90.93
Metallic and other inorganic coatings — Definitions and conventions concerning appearance
90.93
Metallic and other inorganic coatings — Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test)
60.60
Thermal spraying — Coatings for protection against corrosion and oxidation at elevated temperatures
90.93
Thermal spraying — Determination of the deposition efficiency for thermal spraying
95.99
Thermal spraying — Determination of the deposition efficiency for thermal spraying
90.93
Diamond-like carbon films — Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method
90.93
Metallic and other inorganic coatings — Determination of thermal conductivity of thermal barrier coatings
90.93
Thermal spraying — Classification method of adhesive strength by indentation
90.93
Atomic Layer Deposition-- Chemical characteristics and related process specifications of atomic layer deposition precursors
30.20
Metallic and other inorganic coatings — Measurement of Young's modulus of thermal barrier coatings by beam bending
90.93
Vitreous and porcelain enamels — Terminology — Part 1: Terms and definitions
90.93
Vitreous and porcelain enamels — Terminology — Part 2: Visual representations and descriptions
90.93
Thermal spraying — Determination of interfacial toughness of ceramic coatings by indentation
90.93
Vitreous and porcelain enamels — Preparation of samples and determination of thermal expansion coefficient
90.93
Carbon based films — Classification and designations
90.93
Metallic and other inorganic coatings — DC magnetron sputtered silver coatings for engineering purposes — Measurement of coating adhesion
90.93
Specification and requirements of thermal spray coatings for power plant boiler tubes
50.00
Determination of the residual stress of TGO layer in thermal barrier coating by photoexcitation fluorescence piezoelectric spectroscopy
50.00
Test method for CMAS corrosion of thermal/environmental barrier coatings under dynamic thermal cycling
50.00
Non-magnetic metallic coatings on metallic and non-metallic basis materials — Measurement of coating thickness — Phase-sensitive eddy-current method
95.99
Non-magnetic metallic coatings on metallic and non-metallic basis materials — Measurement of coating thickness — Phase-sensitive eddy-current method
90.20
Metallic and other inorganic coatings — Measurement of the linear thermal expansion coefficient of thermal barrier coatings
60.60
Ellipsometry — Part 2: Bulk material model
40.00
Ellipsometry — Part 3: Transparent single layer model
40.00
Ellipsometry — Principles
60.60
Carbon based films — Determination of optical properties of amorphous carbon films by spectroscopic ellipsometry
60.60
Metallic and other inorganic coatings — Measurement of Young’s modulus of thermal barrier coatings at elevated temperature by flexural resonance method
60.60
Metallic and other inorganic coatings — Determination of thermal conductivity of thermal barrier coatings at elevated temperature
60.60
Peel strength of metallic coatings on plastics — Designation and test method under controlled temperatures
20.00
Corrosion protection of offshore wind structures — Part 1: Design considerations
20.20
Corrosion protection of offshore wind structures — Part 2: Primary steel components — general requirements for thermal spraying and painting
20.20
Corrosion protection of offshore wind structures — Part 3: Primary steel components — Supplementary requirements for Foundations
20.20
Corrosion protection of offshore wind structures — Part 4: Primary steel components — Supplementary requirements for Towers
20.20
Corrosion protection of offshore wind structures — Part 5: Supplementary requirements for primary structural steel- and cast components for rotor nacelle assembly
20.20
Metallic and other inorganic coatings — Electrodeposited coatings of tin-cobalt alloy
95.99
Metallic and other inorganic coatings — Electrodeposited coatings of tin-cobalt alloy
90.93
Standard method for porosity measurement of thermally sprayed coatings
60.60
Thermal spraying — Evaluation of adhesion/cohesion of thermal sprayed ceramic coatings by transverse scratch testing
90.93
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 1: Determination of resistance to chemical corrosion by acids at room temperature
90.93
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids and/or their vapours
95.99
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours
90.92
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours
20.00
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel
95.99
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel or a tetragonal glass bottle
90.93
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel
95.99
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel
90.92
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel
20.00
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 5: Determination of resistance to chemical corrosion in closed systems
95.99
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 5: Determination of resistance to chemical corrosion in closed systems
90.93
Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 1: Quality requirements for apparatus, components, appliances and accessories
95.99
Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 1: Quality requirements for apparatus, components, appliances and accessories
90.20
Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 2: Designation and specification of resistance to chemical attack and thermal shock
95.99
Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 2: Designation and specification of resistance to chemical attack and thermal shock
90.92
Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 2: Designation and specification of resistance to chemical attack and thermal shock
50.20
Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 3: Thermal shock resistance
90.93
Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings
95.99
Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings
90.93
Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 5: Presentation and characterization of defects
90.93
Vitreous and porcelain enamels — Characteristics of enamel coatings applied to steel panels intended for architecture
90.93
Vitreous and porcelain enamels — Determination of the edge covering on enamelled steel plate to be used in heat exchangers
90.93
Vitreous and porcelain enamels — Enamel coatings applied to steel for writing surfaces — Specification
95.99
Vitreous and porcelain enamels — Enamel coatings applied to steel for writing surfaces — Specification
90.93
Vitreous and porcelain enamels — Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers — Specifications
95.99
Vitreous and porcelain enamels — Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers — Specifications
90.20
Vitreous and porcelain enamels — Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron
95.99
Vitreous and porcelain enamels — Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron
90.93
Vitreous and porcelain enamels — Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
95.99
Vitreous and porcelain enamels — Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
95.99
Vitreous and porcelain enamels — Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
60.60

No matching records found. Please try changing the filter settings.