This International Standard specifies the mapping functions for a pair of on-demand inter-PINX connections using a circuit
mode basic service and the supplementary service User-to-User Signalling (service 3) of a public ISDN at the same time.
In order to connect a Private Integrated Services Network Exchange (PINX) to another PINX, mapping functions are required
to adapt the specific interfaces at the C reference point to the application at the Q reference point. As such, mapping functions
provide for physical adaptation to the interface at the C reference point. Mapping functions also provide for the mapping of
user channels and signalling information at the Q reference point to the appropriate channels or timeslots at the C reference
The C and Q reference points are defined in ISO/IEC 11579-1.
At the Q reference point the mappings provide a 64 kbit/s service for user channels and a packet mode service for the
signalling channel. Bearer conditioning is outside the scope of this International Standard, except for providing the layer 2 for
the signalling channel at the Q reference point.
Scenario management is outside the scope of this International Standard.
This International Standard is applicable to PINXs which can be interconnected to form a Private Integrated Services Network
(PISN) and which support signalling protocols at the Q reference point.
Status: PublishedPublication date: 2000-09
Edition: 1Number of pages: 9
Technical Committee: ISO/IEC JTC 1/SC 6 Telecommunications and information exchange between systems
Buy this standard
|std 1 61||Paper|