Reference number
ISO 13232-7:2005
© ISO 2025
International Standard
ISO 13232-7:2005
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests
Edition 2
2005-12
Read sample
Published (Edition 2, 2005)
This publication was last reviewed and confirmed in 2021. Therefore this version remains current.

ISO 13232-7:2005

Language
Format
CHF 155
Convert Swiss francs (CHF) to your currency

Abstract

The purposes of ISO 13232-7:2005 are to provide:

  • conventions for calibrating and documenting the important features of the simulation models;
  • guidelines for definition and use of mathematical models for motorcycle impact simulations, which can be correlated against data for full-scale tests;
  • a means for identifying possible additional impact conditions for full-scale testing; and
  • a standardized tool, of optional use, for risk/benefit analysis of rider crash protective devices fitted to motorcycles, based upon the population of impact conditions identified in ISO 13232-2.

ISO 13232 specifies the minimum requirements for research into the feasibility of protective devices fitted to motorcycles, which are intended to protect the rider in the event of a collision.

ISO 13232 is applicable to impact tests involving:

  • two-wheeled motorcycles;
  • the specified type of opposing vehicle;
  • either a stationary and a moving vehicle or two moving vehicles;
  • for any moving vehicle, a steady speed and straight-line motion immediately prior to impact;
  • one helmeted dummy in a normal seating position on an upright motorcycle;
  • the measurement of the potential for specified types of injury by body region; and
  • evaluation of the results of paired impact tests (i.e. comparisons between motorcycles fitted and not fitted with the proposed devices).

ISO 13232 does not apply to testing for regulatory or legislative purposes.

General information

  • Status
     : Published
    Publication date
     : 2005-12
    Stage
    : International Standard confirmed [90.93]
  • Edition
     : 2
    Number of pages
     : 27
  • Technical Committee :
    ISO/TC 22/SC 38
    ICS :
    43.140 
  • RSS updates

 Amendments

Amendments are issued when it is found that new material may need to be added to an existing standardization document. They may also include editorial or technical corrections to be applied to the existing document.

Amendment 1

Ground impact

Edition 2012

Language
Format
CHF 18
Convert Swiss francs (CHF) to your currency

Amendment 2

Correlation factors

Edition 2023

Language
Format
CHF 18
Convert Swiss francs (CHF) to your currency

Life cycle

Sustainable Development Goals

This standard contributes to the following Sustainable Development Goal

9
Industry, Innovation and Infrastructure

Got a question?

Check out our Help and Support

  2. Store
  3. Store
  4. ICS
  5. 43
  6. 43.140
  7. ISO 13232-7:2005