ISO 247:1990
1990-11
Abstract
The two methods are applicable to raw, compounded and vulcanized rubbers of the families described in ISO 1629. The principle of method A consists in heating a weighed test portion in a crucible over a gas burner, followed by volatilization of the decomposition products and transfer of the crucible to a muffle furnace. The crucible is heated until all the carbonaceous matter has been burnt off and constant mass is attained. In method B a weighed test portion is heated in a crucible in the presence of sulfuric acid, first by means of a gas burner and then in a muffle furnace as in method A. Platinum crucibles shall be used for ashing fluorine-containing and lithium-polymerized rubbers. Cancels and replaces the second edition ISO 247:1978, which contains three methods of determination.
General information
-
Status: WithdrawnPublication date: 1990-11Stage: Withdrawal of International Standard [95.99]
-
Edition: 3Number of pages: 3
-
Technical Committee :ISO/TC 45/SC 2ICS :83.060
- RSS updates
Life cycle
-
Previously
WithdrawnISO 247:1978
-
Now
-
Revised by
WithdrawnISO 247:2006