Reference number
ISO 12003-1:2008
© ISO 2024
ISO 12003-1:2008
Agricultural and forestry tractors — Roll-over protective structures on narrow-track wheeled tractors — Part 1: Front-mounted ROPS
Edition 2
2008-08
Withdrawn
Withdrawn (Edition 2, 2008)

Abstract

ISO 12003-1:2008 specifies procedures for both the static and dynamic testing of roll-over protective structures (ROPS) front-mounted on narrow-track wheeled agricultural and forestry tractors. It defines the clearance zone and acceptance conditions for rigid or tiltable, front, two-post ROPS, including any associated rear fixtures, and is applicable to tractors so equipped having the following characteristics.

  • A ground clearance of not more than 600 mm beneath the lowest points of the front- and rear-axle housings (not considering lower points on the axle differential).
  • A fixed or adjustable minimum track width of one of the two axles of less than 1 150 mm when fitted with the widest specified tyres.
  • A mass greater than 600 kg but less than 3 000 kg, unladen, including the ROPS and tyres of the largest size recommended by the manufacturer.

General information

  • Status
     : Withdrawn
    Publication date
     : 2008-08
    Stage
    : Withdrawal of International Standard [95.99]
  • Edition
     : 2
    Number of pages
     : 44
  • Technical Committee :
    ISO/TC 23/SC 2
    ICS :
    65.060.10 
  • RSS updates

Life cycle

Got a question?

Check out our Help and Support

  2. Store
  3. Standards catalogue
  4. ICS
  5. 65
  6. 65.060
  7. 65.060.10
  8. ISO 12003-1:2008