International Standard
ISO 7148-1:2012
Plain bearings — Testing of the tribological behaviour of bearing materials — Part 1: Testing of bearing metals
Reference number
ISO 7148-1:2012
Edition 3
2012-10
© ISO 2024
International Standard
Read sample
Published (Edition 3, 2012)
This standard was last reviewed and confirmed in 2023. Therefore this version remains current.

ISO 7148-1:2012

Format
Language
CHF 63
Convert Swiss francs (CHF) to your currency

Abstract

1 Scope

This part of ISO 7148 specifies tribological tests of metallic bearing materials for plain bearings under conditions of boundary lubrication.

The test procedures described in this part of ISO 7148 enable the friction and wear behaviour of bearing material/mating/lubricant combinations to be compared with that of other combinations, thus facilitating the selection of a bearing material for running repeatedly or for long periods under conditions of boundary lubrication, low speed and continuous sliding. Owing to differences in test conditions, measured friction and wear values can be expected to vary from one test facility to another.

The test results give useful information for practical application only if all parameters of influence are identical. The more the test conditions deviate from the actual application, the greater the uncertainty of the applicability of the results.

General information

  • Status
     : Published
    Publication date
     : 2012-10
    Stage
    : International Standard to be revised [90.92]
  • Edition
     : 3
    Number of pages
     : 11
  • Technical Committee :
    ISO/TC 123/SC 2
    ICS :
    21.100.10 
  • RSS updates

Life cycle

Got a question?

Check out our FAQs

Customer care
+41 22 749 08 88

Opening hours:
Monday to Friday - 09:00-12:00, 14:00-17:00 (UTC+1)

  2. Store
  3. Standards catalogue
  4. ICS
  5. 21
  6. 21.100
  7. 21.100.10
  8. ISO 7148-1:2012