Reference number
ISO 5263-2:2004
International Standard
ISO 5263-2:2004
Pulps — Laboratory wet disintegration — Part 2: Disintegration of mechanical pulps at 20 degrees C
Edition 1
2004-09
Preview
ISO 5263-2:2004
37894
Indisponible en français
Publiée (Edition 1, 2004)
Cette publication a été révisée et confirmée pour la dernière fois en 2019. Cette édition reste donc d’actualité.

ISO 5263-2:2004

ISO 5263-2:2004
37894
Langue
Format
CHF 42
Convertir les francs suisses (CHF) dans une autre devise

Résumé

ISO 5263-2:2004 specifies an apparatus and the procedures for the laboratory-wet disintegration of mechanical pulps that do not exhibit latency or pulps where latency has already been removed. This apparatus and procedure are required for preparation of the test portion in a number of other International Standards dealing with pulps.

In principle, this method is applicable to all kind of mechanical pulps (i.e. mechanical, semi-chemical and chemo-mechanical pulps) that do not exhibit latency, including recovered fibres from mechanical pulps. It is not suitable for mechanical pulps exhibiting latency for which the disintegration procedure described in ISO 5263-3 shall be used.

The procedure specified by ISO 5263-2:2004 should also be used to disintegrate all mechanical pulps to be measured for brightness.

Informations générales

  •  : Publiée
     : 2004-09
    : Clôture de l'examen [90.60]
  •  : 1
  • ISO/TC 6
    85.040 
  • RSS mises à jour

Cycle de vie

Vous avez une question?

Consulter notre Aide et assistance