Résumé
PrévisualiserThis document provides guidance on instrument qualification and size distribution measurement of particles in many two-phase systems (e.g. powders, sprays, aerosols, suspensions, emulsions and gas bubbles in liquids) through the analysis of their light-scattering properties. It does not address the specific requirements of particle size measurement of specific materials.
This document is applicable to particle sizes ranging from approximately 0,1 µm to 3 mm. With special instrumentation and conditions, the applicable size range can be extended above 3 mm and below 0,1 µm.
For spherical and non-spherical particles, a size distribution is reported, where the predicted scattering pattern for the volumetric sum of spherical particles matches the measured scattering pattern. This is because the technique assumes a spherical particle shape in its optical model. For non-spherical particles the resulting particle size distribution is different from that obtained by methods based on other physical principles (e.g. sedimentation, sieving).
-
État actuel: PubliéeDate de publication: 2020-01
-
Edition: 2
-
- ICS :
- 19.120 Analyse dimensionnelle des particules. Tamisage
Acheter cette norme
Format | Langue | |
---|---|---|
std 1 187 | ||
std 2 187 | Papier |
- CHF187
Cycle de vie
-
Précédemment
AnnuléeISO 13320:2009
-
Actuellement
Vous avez une question?
Consulter notre FAQ
Horaires d’ouverture:
De lundi à vendredi - 09:00-12:00, 14:00-17:00 (UTC+1)